WTB: I realize this is pretty petty but I'm missing some pieces that is needed to attach my Accelerator cable to the F.I. body! This is a 1975 2.0L Engine with matching F.I.. I've attached some pics if that helps. If no one has these pieces laying around maybe you could direct me to a supplier! Thanks
Attached image(s)
I have all the parts, but which ones specifically?
OK, I see you are missing two nuts and washers that mount the cable housing to that bracket it's sitting in.
The cable end attaches to the barrel clamp. It should have a small bolt that uses an 8mm socket (3mm bolt?) In the end of the barrel.
Thanks for the information, do you have those pieces? thanks
I have the pieces at CAMP 914. I will pull them off the shelf tomorrow, send an email and I van end pic to make sure we have the right stuff.
Craig at CAMP
Email sent.
Craig
Curt and Craig thanks for your assistance! I found the piece I needed locally! Craig you had mentioned you thought you had one, if you have already mailed it, that's fine, I could always use an extra one! Let me know! Happy Easter....Roy
I'll hang on to this one. It will probably be here when you need another one.
Craig at CAMP
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)