Posted by: stoneman18969 Oct 14 2015, 01:44 PM
Looking for the exhaust pieces that bolt to the engine
Posted by: 914runnow Oct 14 2015, 02:39 PM
QUOTE(stoneman18969 @ Oct 14 2015, 11:44 AM)
![*](style_images/Howard/post_snapback.gif)
Looking for the exhaust pieces that bolt to the engine
bead blasted or as is??
Have both conditions
thanx Rx
Posted by: AZ914 Oct 14 2015, 03:36 PM
I think I have these also, I will check this evening..
Posted by: The Cabinetmaker Oct 15 2015, 12:03 AM
Have a few myself. These should be plentiful.
Posted by: stoneman18969 Oct 15 2015, 08:43 AM
I know what the down oioes look like but is there intermediate pipes before muffler, i may want them to,any pics,price,uncleaned,in in pa
Posted by: rhodyguy Oct 15 2015, 11:32 AM
The stubs install inbeween the 75-76 heat exchangers and the heads.
Posted by: malcolm2 Oct 15 2015, 11:39 AM
unless you are doing a concours car and want them to be pretty, you should find them for next to nothing.
Clark
Posted by: stoneman18969 Oct 15 2015, 11:46 AM
I looked at some pics and i want the heat exchangers as well,no muffler, who ever has all four parts and takes paypal im in
Posted by: malcolm2 Oct 15 2015, 12:00 PM
QUOTE(stoneman18969 @ Oct 15 2015, 12:46 PM)
![*](style_images/Howard/post_snapback.gif)
I looked at some pics and i want the heat exchangers as well,no muffler, who ever has all four parts and takes paypal im in
![Attached Image](http://www.914world.com/bbs2/uploads/post-13139-1444931833.jpg)
found an old ebay photo. Kinda small, but you can see they are different than the <' 74 style.
Bowlsby and pelican have lots of pictures. Plus AA has the exploded view parts diags.
Pictures to you this afternoon.
Clark
Posted by: rhodyguy Oct 15 2015, 12:15 PM
You'll find some of the heat ducting differs too.
Posted by: stoneman18969 Oct 15 2015, 12:19 PM
Pics look good now if i spin it all around cut and re flange it to go straight out the back to a turbo we'll be in bis Ness, my 4 into one setup,looks hoorible
Posted by: malcolm2 Oct 15 2015, 04:09 PM
QUOTE(stoneman18969 @ Oct 15 2015, 01:19 PM)
![*](style_images/Howard/post_snapback.gif)
Pics look good now if i spin it all around cut and re flange it to go straight out the back to a turbo we'll be in bis Ness, my 4 into one setup,looks hoorible
Ok here is a picture of mine. There are 2 down pipes and 8 HE. I assume 4 sets.