Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: 911 engine parts, 2.2S, 2.4S pistons, heads, cams, bearings

Posted by: Luke M Apr 11 2016, 04:31 PM

I'm heading to Hershey this weekend and can bring these parts with me. I want to have a confirmed sale on parts prior to leaving for the swap meet. I just don't want to drive parts down if I do not have a firm sale. I have limited space and I plan on buying a few things while I'm there. Also listed over on the Pelican board.

I will add pics of the parts later tonight.

911 2.4 S pistons : $250.00

911 83 3.0 SC pistons (alusil) came from a running motor and where replaced for higher comp JE's. : $200.00

911 2.4 T MFI cams : $100.00

2.0 E Bare heads , stock MFI ports part # 901.104.306.1R , k1819d : $200.00

2.4 T Bare MFI heads with opened ports to 35 mm intake, 35 mm exhaust, part # 911.104.302.0R , k1819n : $300.00 *** seats & some studs will need to be replaced, intake/exh ports need a little clean up per Ollie's Machine Shop***

Two New main bearing sets for years 65-74 .25 mm undersize.

Kolbenschmidt brand part # : 87 798 610 0.25
part # 911 101 901 50 : $500.00

Glyco brand main bearings .25 mm undersize part # : 911 101 901 50
$300.00

Glyco brand rod bearings .25 mm undersize 65-71 2.0/2.2
part # : 901 103 141 50 $150.00

911 engine oil cooler off a running 83 3.0 : $200.00