Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ The: my car got totaled Lot FS
Posted by: tazz9924 Nov 23 2019, 08:59 PM
Hello 914 world, and my car got totaled, everyone was ok. But there are still some good parts left on it. This is just some of the little things i picked out. If you are looking for metal to be cut out i can probably make that happen but a lot of the chassis got damaged. Dont be afraid to ask.I unfortunately do not have good sun visors or mirrors, in fact most interior stuff got hit hard with a mercedes and rain by now. All prices are without shipping, ill have to figure out shipping prices.
Parts list so far:
Reproduction Rear reflector $80 It has some scuffs that im sure can be buffed out, but still driver quality
Hydraulic clutch bracket $20 (pending) great piece for a 901 or a subaru conversion. Uses a willwood 3/4 master cylinder. Previously clearenced for coolant tubes.
Various switches: Ill just throw em in someone’s package if they want them.
Interior Driver door handle $10
Nrg wheel $35 Buttons work good, one wire is a bit crushed. Comes with NRG center piece with a scuff.
Feel free to ask me about anything else you might need
Posted by: tazz9924 Nov 23 2019, 09:02 PM
Rear reflector
Posted by: tazz9924 Nov 23 2019, 09:06 PM
Sold pedal cluster
Posted by: tazz9924 Nov 23 2019, 09:07 PM
Master cylinder bracket
Posted by: tazz9924 Nov 23 2019, 09:09 PM
Various switches I also have a good wiper one. 
Posted by: tazz9924 Nov 23 2019, 09:09 PM
Window fuzzys sold
Posted by: mepstein Nov 23 2019, 09:10 PM
I hope nobody was hurt.
Posted by: tazz9924 Nov 23 2019, 09:10 PM
Ignition switch sold
Posted by: tazz9924 Nov 23 2019, 09:11 PM
Door handle
Posted by: bdstone914 Nov 23 2019, 09:12 PM
@http://www.914world.com/bbs2/index.php?showuser=18779
date='Nov 23 2019, 08:59 PM' post='2764509']
Hello 914 world, and my car got totaled. but there are still some good parts left on it. This is
Rebuilt Pedal Cluster $90 Rebuilt by a member here with bronze bushings, though the finish isnt great, the powder coat is still good. I modified it to fit a hydraulic clutch bracket so it will need to have two bolts tac welded back on for stock applications and a new roll pin put in (it started to back out). I probably only got a couple hundred miles of driving on it.
Sorry to see your car totaled. Hope there were no injuries.
If I build that pedal set I will rebuilt it for free to a standard setup.
I really want to see the roll pin worked out. Never seen that. Something must be wrong.
Bruce
Posted by: Tdskip Nov 23 2019, 09:18 PM
Oh crud, hope everyone is OK
Posted by: tazz9924 Nov 23 2019, 09:19 PM
@http://www.914world.com/bbs2/index.php?showuser=18779
date='Nov 23 2019, 08:59 PM' post='2764509']
Hello 914 world, and my car got totaled. but there are still some good parts left on it. This is
Rebuilt Pedal Cluster $90 Rebuilt by a member here with bronze bushings, though the finish isnt great, the powder coat is still good. I modified it to fit a hydraulic clutch bracket so it will need to have two bolts tac welded back on for stock applications and a new roll pin put in (it started to back out). I probably only got a couple hundred miles of driving on it.
Sorry to see your car totaled. Hope there were no injuries.
If I build that pedal set I will rebuilt it for free to a standard setup.
I really want to see the roll pin worked out. Never seen that. Something must be wrong.
Bruce
Everyone was fine, the roll pin was kinda odd, i thought the slave cylinder was going or something.
Posted by: TonyA Nov 23 2019, 09:46 PM
Glad your ok. How is the rear targa rubber pad the one the is screwed in and covered with those little plastic buttons. ? I’ll send you the proper name when I look it up. Past my bedtime here on the east coast
Posted by: Jonathan Livesay Nov 23 2019, 10:05 PM
You should just call it the "this sucks" sale thread.
Posted by: yeahmag Nov 23 2019, 10:21 PM
I’m interested in a hydraulic clutch package if you can put something together.
Posted by: sb914 Nov 23 2019, 10:59 PM
I’m soooooo sorry for your misfortune!
Posted by: tazz9924 Nov 24 2019, 07:10 AM
I’m interested in a hydraulic clutch package if you can put something together.
I can sell you the plate, ill be using the rest of the hydraulic clutch stuff on my new “car”
Posted by: tazz9924 Nov 24 2019, 07:11 AM
Glad your ok. How is the rear targa rubber pad the one the is screwed in and covered with those little plastic buttons. ? I’ll send you the proper name when I look it up. Past my bedtime here on the east coast
Ill have to check in a couple days when i get back out there.
Posted by: Cairo94507 Nov 24 2019, 08:31 AM
Wow. That's a lot of damage. I am glad everyone is OK. I hope you put together another 914. 
Posted by: tazz9924 Nov 24 2019, 08:39 AM
Wow. That's a lot of damage. I am glad everyone is OK. I hope you put together another 914.
“914”
Posted by: tazz9924 Nov 24 2019, 08:40 AM
nrg wheel
Posted by: Superhawk996 Nov 24 2019, 08:45 AM
So glad you're OK.
I feel your pain. This brings back memeories of my car being totaled even though I wasn't even in the car when it happend. When it happened to mine, both the driver and passenger walked away.
I'm continually amazed at how much damage these cars can take and still have the occupants survive. Well ahead of their time for 1970.
The car has two key crush zones:
1) The kink in the rear frame where the half shafts pass under the "frame"
2) the empty front tunk structure in front of the gas tank and then the front bulkhead in front of the tank itself.
Posted by: Garland Nov 24 2019, 09:38 AM
So glad you're OK.
I feel your pain. This brings back memeories of my car being totaled even though I wasn't even in the car when it happend. When it happened to mine, both the driver and passenger walked away.
I'm continually amazed at how much damage these cars can take and still have the occupants survive. Well ahead of their time for 1970.
The car has two key crush zones:
1) The kink in the rear frame where the half shafts pass under the "frame"
2) the empty front tunk structure in front of the gas tank and then the front bulkhead in front of the tank itself.
3) Spare tire
Posted by: gcrotvik Nov 24 2019, 09:51 AM
Wow, that's a bummer. Glad all are OK. I will take the "Outer window fuzzys: $10 brand new". PayPal?
Posted by: Superhawk996 Nov 24 2019, 10:07 AM
So glad you're OK.
I feel your pain. This brings back memeories of my car being totaled even though I wasn't even in the car when it happend. When it happened to mine, both the driver and passenger walked away.
I'm continually amazed at how much damage these cars can take and still have the occupants survive. Well ahead of their time for 1970.
The car has two key crush zones:
1) The kink in the rear frame where the half shafts pass under the "frame"
2) the empty front tunk structure in front of the gas tank and then the front bulkhead in front of the tank itself.
3) Spare tire
Agree on #3. I sort of cringe when I see the vertical mount spares though they look really nice and tidy.
4) The gas tank itself but at that point a lot of other bad thinks can happen.
Structually though, the tank would offer quite a bit of energy absorbtion as it crushes especially if it were closer to empty. When my car was hit (rear end collision) the engine broke into pieces and largely went under the car without any penetration into the occupant compartment. breaking up that engine absorbed quite a bit of energy.
Again -- so glad no once was hurt in this.
Posted by: rhodyguy Nov 24 2019, 10:11 AM
How did you manage to total your car?
Posted by: 9144me2enjoy Nov 24 2019, 11:19 AM
Sorry to hear about the crash but at least your still in the game to tell the story! The car can be replaced but the driver and passengers cain’t. Any pics of the car before the crash? Hang in there.
Posted by: tazz9924 Nov 24 2019, 12:00 PM
Wow, that's a bummer. Glad all are OK. I will take the "Outer window fuzzys: $10 brand new". PayPal?
sorry i sold them already. if it falls through you are first in line
Posted by: tazz9924 Nov 24 2019, 12:02 PM
How did you manage to total your car?
hit while parked
i didn’t even get to mess it up myself. It did make a mercedes roll and the fuch that got hit was ok thankfully
Posted by: Ed_Turbo Nov 25 2019, 09:47 AM
Can you send me a pic of the driver’s side door handle. I would like to see what constitutes driver quality.
-Eddie
Posted by: 913B Nov 25 2019, 10:34 AM
Interested in the interior light on the backpad if you have one?
Posted by: 6s219 Nov 25 2019, 10:43 AM
Sorry for your loss. I feel guilty asking for items under these circumstances.
I would be interested in the sun visors if in good shape and available.
Posted by: tazz9924 Nov 25 2019, 06:02 PM
Can you send me a pic of the driver’s side door handle. I would like to see what constitutes driver quality.
-Eddie
its on my page one of this ad
Posted by: tazz9924 Nov 25 2019, 06:03 PM
Interested in the interior light on the backpad if you have one?
i wish i did, broken in half like the rest if em
Posted by: ahycaramba Nov 25 2019, 06:20 PM
Oh Snap!!! Sorry for your loss. Is this the famous Subydoo 914wrx from youtube?
Posted by: ndfrigi Nov 25 2019, 06:35 PM
Oh Snap!!! Sorry for your loss. Is this the famous Subydoo 914wrx from youtube?
Good you are @http://www.914world.com/bbs2/index.php?showuser=18779 okay and the car can be replace.
http://www.914world.com/bbs2/index.php?showtopic=274166
Posted by: second wind Nov 25 2019, 10:57 PM
Why does it always seem to be the passenger side? Love to hear some opinions on this phenomena. Thank you.
gg
Posted by: Ed_Turbo Nov 25 2019, 11:21 PM
Can you send me a pic of the driver’s side door handle. I would like to see what constitutes driver quality.
-Eddie
its on my page one of this ad
Nevermind, I thought you were talking about the outside door handle.
Posted by: tazz9924 Nov 26 2019, 06:38 AM
Oh Snap!!! Sorry for your loss. Is this the famous Subydoo 914wrx from youtube?
Good you are @http://www.914world.com/bbs2/index.php?showuser=18779 okay and the car can be replace.
http://www.914world.com/bbs2/index.php?showtopic=274166
Oh man it looks so much different since the build thread ill change that picture to what it looked like before the crash lol
Posted by: flmont Nov 26 2019, 08:38 AM
I could use the engine bulkhead sheet metal,..meaning the metal behind the seats,..Thanks...Frank
Posted by: bigmacdave Nov 26 2019, 11:59 PM
Id like to snag the pedal cluster and take Bruce up on his offer to fix it if thats cool.
Posted by: tazz9924 Nov 27 2019, 06:13 AM
Id like to snag the pedal cluster and take Bruce up on his offer to fix it if thats cool.
no problem just pm me with your details and ill get it off to bruce
Posted by: tazz9924 Nov 27 2019, 06:15 AM
I could use the engine bulkhead sheet metal,..meaning the metal behind the seats,..Thanks...Frank
email me a picture with the area you need and ill get it cut out
elliottloe@outlook.com
Posted by: tazz9924 Nov 28 2019, 12:18 AM
For thanksgiving the reflector im reducing to $80 and the interior door handle to $10
Posted by: Retroracer Nov 28 2019, 09:46 AM
Are the gauges for sale? Particular interested in the tach,
- Tony
Posted by: 914-300Hemi Dec 7 2019, 07:06 AM
Sorry to hear about the accident and glad that you are okay.
Posted by: tazz9924 Dec 7 2019, 08:11 PM
Are the gauges for sale? Particular interested in the tach,
- Tony
Tach is good, could be restored but works great
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)