Like it says, I'm looking for Targa Latches and Front under cover. Not sure if there are early and late but if so I need late. Car is a '75. Very good to excellent condition.
Thanks. Joe.
Joe...I think I have an extra steering rack cover....will check the parts stash
bdstone for the latches if he has any stock,bought rear ones he had reconditioned,very nicely done.
@http://www.914world.com/bbs2/index.php?showuser=19387
' date='Apr 14 2020, 11:20 AM' post='2804282']
Like it says, I'm looking for Targa Latches and Front under cover. Not sure if there are early and late but if so I need late. Car is a '75. Very good to excellent condition.
Thanks. Joe.
[/quote]
Here is a set of late targa latches with remanufactured hooks.
I have several steering rack pans too.
Attached thumbnail(s)
Thanks for the responses. I should've been more specific. I need front targa latches. The handle part is missing from mine. Also looking for one of those small hole plugs that goes in the front targa pad above the visors. (In the picture)
@http://www.914world.com/bbs2/index.php?showuser=19387
' date='Apr 15 2020, 06:09 AM' post='2804568']
Thanks for the responses. I should've been more specific. I need front targa latches. The handle part is missing from mine. Also looking for one of those small hole plugs that goes in the front targa pad above the visors. (In the picture)
[/quote]
I think all front targa latches are the same. I have a box of them. Just used notvtmrefinished.
@http://www.914world.com/bbs2/index.php?showuser=1319
Are mine broken or just missing the handle? Do you have the little plug?
@http://www.914world.com/bbs2/index.php?showuser=19387
date='Apr 15 2020, 06:53 AM' post='2804582']
@http://www.914world.com/bbs2/index.php?showuser=1319
Are mine broken or just missing the handle? Do you have the little plug?
[/quote]
Probably just missing the plastic handle. That is what breaks most often.
Yes I have screw cover plugs
Joe...
Here's the steering rack cover I have...
it's a decent solid one with no rust thru problems
good mounting holes
just needs surface rust to be cleaned up and painted
let me know if this would work.
Thanks...John
@http://www.914world.com/bbs2/index.php?showuser=1319
Paypal sent.
Hi Joe,
I somewhat remember a refreshed front suspension pan in the full rebuilt suspension that I sent to you. Have you gone through all the parts?
Best, Bob B
Got your hole plugs cheap -
https://900designs-container.zoeysite.com/8-mm-interior-screw-cover
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)