Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: More bling
Posted by: Montreal914 Jun 22 2024, 01:06 PM
For Sale:
Freshly replated parts. Prices include shipping to the lower 48 states:
Rear mounted fuel pump brackets (3 available): $25 ea. The one on the right had the nut epoxied in place for some reason 
$20
The one on the right (epoxied)
Engine lid latch: $40
Parking brake short cable and parts: $20 (note condition 
)
Posted by: bdstone914 Jun 22 2024, 07:21 PM
The brackets you list as fuel pump are actually for the coil. They are very similar but the ears of the fuel pump brackets slant downward.
Posted by: Montreal914 Jun 22 2024, 07:29 PM
Bruce ( @http://www.914world.com/bbs2/index.php?showuser=1319 ) , I am not so sure about that...
These were removed from fuel pump assembly. You can see the semi-circular notch on the top of the omega which is there to clear the fuel pump connector. The coil bracket doesn't have the circular notch.
Edit: This is what I am referring to. I may be wrong, but I don't see any pictures of coil brackets with that notch. That being said, this bracket could probably be used for either (pump or coil). Get two for $40 shipped! 
Posted by: bdstone914 Jun 22 2024, 11:32 PM
Bruce ( @http://www.914world.com/bbs2/index.php?showuser=1319 ) , I am not so sure about that...
These were removed from fuel pump assembly. You can see the semi-circular notch on the top of the omega which is there to clear the fuel pump connector. The coil bracket doesn't have the circular notch.
Edit: This is what I am referring to. I may be wrong, but I don't see any pictures of coil brackets with that notch. That being said, this bracket could probably be used for either (pump or coil). Get two for $40 shipped!
You could be right. I have a couple coils with the brackets still on them. I wll see if they have that notch which i can't see that it serves a purpose. But if i am right that notch would provide clearance for the round connector housing.
Posted by: s13u74cr4 Jun 23 2024, 03:50 PM
Gonna say I am pretty sure those are fuel pump brackets. After so recently futzing around with my lines that bracket is keenly in my memory. The cut out bit is indeed where the electrical harness fits. The PO of mine had flipped this bracket so it was nearly impossible to get the lines and pump to fit without binding, or that is just correct which is not ideal. I flipped it which made that problem go away. Meaning indentation facing rearward not back to the firewall.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)