Parting out a complete 74 914 2.0. No part too small. Same day shipping. Contact: Bill (704)829-0976 or email billywhitesides1@aol.com
any tan interior? How's the dash? How's the rear targa head bolster? And the front targa head bolster? I'm looking for good vinyl, black and tan. And carpet. Thanks
How about an exhaust bracket?
How are the tail light lens?
Highways. The rear bolster has been sold already. The dash is there but has several typical large cracks. The carpet is light brown and faded some but certainly usable. No tan interior pieces.
Johnnie. Yes I have the correct muffler hanger
Ruffus. The tailigt lenses look pretty good. I'll take a closer look.
Thanks everyone. Bill
I know its small but how are the license plate lights? and did your heater blower have the split for the tubes?
I'm looking for the late shifter, linkage rods and coupler for a side shift.
Shipping to Jacksonville FL 32223
Norcalwtc. The car has a Bursch exhaust
klikkid3. Yes it has the y splitter for the heater fan.
Troy. I spoke to you concerning the side shift parts. Best of luck with your search.
Thanks Guys. Bill
Original interior light? Should have a chrome ring and white button. Thanks
Jonathan. Sorry no can do on the original interior light. I wish I had a box of those... there're becoming as rare as hens teeth! Bill
Bill,
I actually got a muffler bracket as part of a package deal with a 2.0 ssi purchase. What condition is the Bursch in?
Got any rear calipers?
Thanks
Chris
Johnnie. Let me take a closer look at it and I'll get back ASAP.
Chris. I know I have one possible 2 good rear calipers. How many do you need.
Bill (704)829-0976 or email billywhitesides1@aol.com
Doing any cutting yet? I just found out I need a piece of the front trunk.
Tom
I need the rear targa top latches with the pins. These are on the top itself.
Thanks
Chris. Thanks for the payment. I'll get the calipers shipped out as soon as I can.
Johnnie. I took a closer look at the exhaust and it is a Thunderbird. It looks very similar to the Bursch quiet unit. It is a 2.0 muffler assembly
Tom: What area do you need?
Les: Yes I have the top latches. PM sent. Thanks Bill
I have these 3 LEFT side tailight lenses. Sorry the passenger side has been sold. Bill (704)829-0976 email billywhitesides1@aol.com
Hi,
Let me know on the lights. I will take one left if I can. PM me with the $$.
Thanks,
Rick
How are the rear tail light buckets only? Picks, Price and shipping to 94063 requested.
Regards,
James
James. Here is a picture of my best tailight housing. Which side do you need?
Rick. PM sent as requested. Thanks everyone. Bill
Rick,
PM SENT
Regards,
James
Do you have the headlight switch? (has 10 terminals)
Is this the switch you're looking for(the one on the left) or the later style one. Let me know. Bill
Bill,
I'm looking for both front turn signal bucket stays- just the metal strap that holds the bucket in.
Also I'm in need of (2) rear turn signal buckets, I got good lens.
Let me know
Kevin
Kevin. I posted a picture of my best rear tailight bucket above. I also have the front turn signal housing mounting brackets as well. Thanks Bill (704)829-0976 email billywhitesides1@aol.com
I need the rear sheetmetal tail light panel. Is yours in good shape?
Yes its in good shape. Can you give me an idea on how much you need? Thanks Bill (704)829-0976 or email billywhitesides1@aol.com
I'd like the whole piece so I can drill out the factory spot welds and replace it. Mine has a bunch of reflector holes. Any pics?
The piece looks solid. There are a couple places where I see alittle grey primer, I havn't taken the tailight housings out yet, its raining hard here today. I'll get a closer look when the rain lets up. Thanks Bill
I'll need to see a couple of pics. If it's straight and rust free we can work something out.
Steve. Here is a picture of the Left and Right arm rest assemblies. I cleaned them up and didn't find any torn places. On the driver's side there is a place where the adhesive has lifted which can be easily reglued. Let me know on these. Bill (704) 829-0976 or billywhitesides1@aol.com
I need front bumper chrome and upper bumper pad. Please send pictures. randallrjohnson@sbcglobal.net. Thanks!
pm sent
T.C.
Randall. Sorry the front bumper has been sold.
TC. Best of luck on your search for the tailight lense. Bill
Toast. Toast. Here is a picture of the crack on the driver's side tailight lense. The rest of the lense is nice cosmetically with only a few tiny surface scratches, the red color hasn't faded too much. Let me know on this one. Bill (704)829-0976 email billywhitesides1@aol.com
Got a good driver's side door?
Leto. Yes I have a nice late style door. Do you need the entire door with windows, regualtor and trim pieces or just the bare shell. Thanks Bill
Leeb. Leeb Here are the 2 oil pumps. I took them apart and the gears are in good shape in both units. Thanks Bill. (704)829-0976 email billywhitesides1@aol.com
How deep are you going to cut into this beast? I'm in dire need of the passenger side engine mounting bracket and rear suspension console. Thanks!
- Steven
Steven. I should have this area in good condition on another 72 914 that I'm parting out. I'll take a closer look and get back to you. Bill
Do you have a rear bumper pad in decent shape? Thanks, Gordon
Awesome! I eagerly await your reply!
Steven. The engine mounting bracket is in good shape but the suspension console inner "ear" is broken off. Let me know on the mounting bracket.
Gordon. Sorry no rear bumper top.
Thanks Bill (704)829-0976 or email billywhitesides1@aol.com
email sent
Hi i need the wiring harnes let me know if its in good shape and how much.
Charles. Do you need the entire body wiring harness or just the engine harness, I have both. Let me know. Thanks Bill (704)829-0976 email billywhitesides1@aol.com
Did the muffler sell yet?
Thanks in advance,
Kevin
Sketes. Have to pull the engine to take a closer look. Should have the long inner long heater tube/hose as well.
Kevin. I have several. What year and engine size do you need?
Charles. Yes I have both in good condition. Will give you a call.
Bill (704)829-0976 email billywhitesides1@aol.com
Sorry about that... DUH! 1974 2.0, looking for Bursch exhaust.
Thanks again,
Kevin
I need an accelerator pedal. How much shipped to 17113?
Thanks,
Ryan
Ryan. I have a new one if this is an option. The used ones that I have are rusted on the lower mounting hinge and are junk. Let me know Bill (704)829-0976 or email billywhitesides1@aol.com
Kevin. I checked and teh car has a Thunderbird muffler on it which looks identical to the Bursch set-up. Let me know if this is an option. Bill (704)829-0976 or email billywhitesides1@aol.com
I need the rear plate on the tranny (the piece w/the mounting arms).
Also need drivers side inner door handle assm. THX
I have the inner door handle assembly, but don't have the rear cover. Let me know on this. Bill (704)829-0976 or email billywhitesides1@aol.com
Do you have any of the EFI?
Yes I have everything, what do you need. Bill
Could you help me with any of the parts I'm looking for:
plastic fuse cover
left front turn signal assembly
right side speaker grill
interior light lens cover
right side rocker panel
dog bone foot rest (preferably black)
Thanks
I should have everything. Let me check and I'll get back to you. Bill
I'm looking for the ecu bracket that attaches to the battery tray.
benalishhero. Yes I have this for you. Let me know. Bill (704)829-0976 email billywhitesides1@aol.com
Jeff. Here is the picture of the center console oil temp gauge and the A/C vents. The A/C vents were from a VPC style underdash unit. I'm not sure if they will work with the DPD unit. Let me know on these. Thanks Bill (704)829-0976 email billywhitesides1@aol.com
glove box "handle"?
Wayne. Eary or late style. Bill
Yes I have it. Do you want the knob only or the lid included. Bill
Wayne. Thanks it's on the way.
Joseph. Thanks for the payment. The injection is on the way.
Bill (704)829-0976 email billywhitesides1@aol.com
thanks!
Rob. Yes I should have all of these. I'll check and get back to you. Thanks Bill
Rob. I have the letters. Are you looking for the Porsche Crest hood emblem as well? I have this original one from a 74 911S. Let me know if this is an option. I'll send an email. Thanks Bill (704)829-0976 email billywhitesides1@aol.com
Bob. Here is the picture of the side shifter transmission. This is a solid shifting good clean unit that's ready to install. Thanks for the payment on the sunvisors, they're on the way. Let me know on the tranny. Bill (704)829-0976 email billywhitesides1@aol.com
Bill, is the engine good and for sell?
I have the 2.0 engine. Thanks Bill (704)829-0976 or email billywhitesides1@aol.com
I would like to purchase complete fuel injection if you have all of it and know it was working. Thank You, John
Thanks Bob, I appreciate it. Let me know if you need any other parts. Bill
John. Sorry the fuel injection has been sold. Best of luck with your search. Bill
Hi, I have a well rusted 1973 914 that needs some body parts? I need sail panels both sides, door jambs both sides, front wing drivers side, and the inner rocker panels? And also do you ship international?
Yes I can ship to you in Norway. The best thing to do is to make a list of all the parts and email me at billywhitesides1@aol.com Thanks Bill
Jeff. Here is a picture of the front chrome bumper. I have a rear one as well. Thanks Bill (704)829-0976 email billywhitesides1@aol.com
hello: Got a Battery tray? Thanks Joe
Sorry Joe. Nothing nice here. I'm sure one of our fellow members may be able to help you out. Thanks Bill
Hi Bill,
I am looking for a complete rear trunk panel for my 914-6 race car. Previous owner carved it up and I need to install a new one. I don't check on this site often. If you have this can you advise cost and shipping to New Port Richey, FL 34654.
Thank you in advance for your consideration Ken Greenfied
Ken. I should have this in good condition. I'll check and get back to you. Thanks Bill
Velum. Here is the picture of the 2.0 fuel injection wiring loom for your 914. Let me know on this one. Bill (704)829-0976 email billywhitesides1@aol.com
I was wondering if you had the trim for the sail panels. I just need the lower horizontal pieces for both sides. Also what would shipping be to 45107?
I know I have one side, I may have the other one as well, I'll check and get back. Bill
Any tail light lenses left?
Yes I have both sides. I've got nice and not so nice. What condition are you looking for? Let me know. Bill (704)829-0976 email billywhitesides1@aol.com
have you got a defroster cable, and possibly the defrost lever for a console-car? 2 port heater blower?
Wayne. Yes I have the dual outlet heater fan and the defroster cable. Don't have the console heater lever. Pm sent. Bill
Here are some more good parts available. Bill (704)829-0976 email billywhitesides1@aol.com I have pictures of the other parts as well but can't upload them at this time. [attachmentid=193
542]
-oil temp sending unit and engine cover plate
-early 70-71 lower dash knee pad
-US version tailight lenses
-rear trunk carpet and bilstein jack
-seat frame and seat rails
-chrome inner door handle surrounds
-distributor for fuel injected 914's
-early 1970-72 shifter
-tailight housings
-original hood crest from 77 911
Attached image(s)
Do you still have side view mirrors (both)? Passenger side exterior door handle?
Utah. Yes I have the passenger side door handle. Sorry the mirrors are gone.
Wayne. Yes I have the early style fan. I'll check on the condition and get back to you. Bill
Jeff. The transmission is yours. Ship the same day I receive payment. Thanks Bill
I also have an auxillary oil cooler available as well. Bill (704)829-0976 email billywhitesides1@aol.com
do you have the light that goes in the seat by your head?
Looking for the rear floor pan air flaps that attach to the rear of the pan underneath the car.
Steve: Sorry no factory side mirrors
AL: I have a nice set of Gold PORSCHE letterrs. I'll take a closer look at them:
Wbonucci: Sorry no light. Reproduction ones aren't that expensive.
Woodone337: Yes I should have the flaps. Let me check and I'll get back. Thanks everyone. Bill (704)829-0976 email billywhitesides1@aol.com
Gary Here is a picture of the chrome look foglight grilles. Let me know. Bill (704)829-0976 email billywhitesides1@aol.com
Yes I have the flaps. I may have the tool kit as well. Let me take a look and I'll get back. Bill
Bill,
Do you have a left front turn signal assembly?
Thanks,
tim
do you have any center console parts in good condition?
thanks wes
I am looking for the filler pcs (left and right)between the headlamps and the front bumper rubber.
Do you have a passenger front turn signal housing? I really need one. Thanks, don't need any lenses, just the housing.
Early on you mentioned having a steering column, ignition switch and key. I need those if you still have them and they are in good condition. Please let me know. Thanks for your help.
Al. I only have a gold set of PORSCHE engine lettering. Are you looking for the chrome ones or gold?
tim. Yes I have the left turn signal housing
Wes. Sorry no center console parts. Best of luck with your search
krank: Yes I have both filler pieces
turnaround: Yes I have the passenger side turn signal housing
lanes: Let me take a closer look at the column housing and I'll get back to you. Thanks everyone. Bill
Al. From what I remember they were in really nice shape. It will be the first of the week before I can take a closer look and get back to you. Shipping on something like this shouldn't be much at all. Bill
Jack. Here is the 2.0 fuel injection harness. Should be a nice candidate. I have the 2.0 brain as well. Let me know on these. Bill
Mike. Here is the picture of the fresh air fan and the early shifter. The other parts are 911 stuff. Let me know on these. Thanks Bill (704)829-0976 email billywhitesides1@aol.com
Looking for a complete fuel injection system.
Thanks,
Kirk
I'm looking for an altenator and a drivers side door panel.
Thanks!
Jesse
More parts still available. Bill (704)829-0976 email billywhitesides1@aol.com
Do you still have a driver side tail light lens? If so how much are they to ship to nashville, tn 37214?
I've sold the one off the car but I think I have another one is storage. I'll check and get right back to you. Bill
The only one I have is a NEW european rear lense. Let me know if this is an option. Bill (704)829-0976 email billywhitesides1@aol.com
I need both heater "flapper" boxes if you have them. Main thing is that the springs are fully functioning. Mine are shot and the engine is out. I have a '73 2.0, but I believe they are universal for all years. These are the boxes that attach to the heat exchangers.
Thanks!
Scott
How much for the rear lense ?
Thanks
Andy
Scott. Sorry I don't have any good flapper boxes. I'm sure someone on the board has one. Thanks Bill
Still have parts available. Bill (704)829-0976 email billywhitesides1@aol.com
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)