A couple questions on reinstalling windows on a 72.
1. The first photo shows a plastic "guide" that is glued to the rear portion of the glass. My problem is, my car has a rubber piece in the metal channel this piece rides in. In this photo there is no rubber piece. Which is correct?
2. Same question but for the front window channel guide. Do the roller pins ride inside a rubber gasket there as well? (item number 17 i've circled). My car doesn't have one, so wondering if I was missing them, or whether it might be what the factory started doing with the later cars.
I've found enough things on this car that have been put on backwards that I rather run this by you guys prior to reinstalling. Plus as it's a late '72 it has both early and late characteristics.
thanks in advance.
she's starting to look like a real car!
Yep, I'm sure you will need the glass run channel. I'm not sure where to get them. Maybe mikey914 (Mark) or George AA?
EDIT: I stand corrected by George. I have a 72 but mist have the 73 channels because I have the felt runners in my doors.
no channel gaskets on a 72. front of the glass has a metal bar glued to it with four pins that mount four rollers. Rear has a metal plastic guide glued to the bottom corner. That is it. Runs in the metal channels.
you will need to reglue the that guide in the picture to the bottom corner of your glass
Got it, thanks guys!
You might be interested in these. I'm starting a new thread now.
Beats $8 each OEM
I still have the original doors from my /6 intact in the shed. Let me know if you need some pics or anything. I'm going to have to dig them out one of these days anyway.
hey sorry to bump this old thread, but what glue did you guys use to reattach the window guide? rearview mirror glue work?
thanks.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)