Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ interior upgrades

Posted by: Ctrout Jun 11 2004, 10:36 PM

The 914 interior is rather sparse and while I don't really want to add a bunch of weight to the car, I would like to see what kind of luxury refinements have been successfully accomplished. Has anyone ever attempted to swap in a pair of boxster seats? What about other interior upgrades? How refined is yoir 914 interior? Any pics?

Posted by: Andyrew Jun 11 2004, 10:42 PM

No carpet (its heavy) No sound tar, no backpad. No center console (heavy) No nathing.

Drive it every day, and I dont miss any of that junk.

Andrew

Posted by: MattR Jun 11 2004, 10:52 PM

Sparse interior? This is my first car with carpet installed and seats with matching color! biggrin.gif

Posted by: Joe Ricard Jun 12 2004, 06:45 AM

agree.gif If you want nice interior buy my 928. Teeners are supposed to be spartain. My seats don't match, 1 recaro SRD and 1 stock early "if I put the back pad in".
No carpet Are they supposed to have carpet? both of mine never had it rolleyes.gif

Just strip the floors and put an epoxy paint down and then put the wire in a loom along the top of the tunnel. Looks great. Plus it will motivate you to keep the floor pan clean so it don't rust out. wacko.gif

Posted by: seanery Jun 12 2004, 07:12 AM

you're very limited on what seats will fit. These cars were designed with a very low seat cushion, most cars, even cars you think are similar have much higher seats. The only seats that I have seen that will probably fit are C4 Corvette seats (1986-1996). They are expensive and ragged out by now, so they aren't for everyone.

Posted by: kevinseven Jun 12 2004, 11:09 AM

I was wondering if Honda s2000 seats would fit. I've seen pairs of them on ebay a lot chaper than a single Recaro Pole Position in leather.

Posted by: jgiroux67 Jun 12 2004, 11:54 PM

I am pretty sure that the Sparco Roadster seat will fit, but the problem is that they are 400 a peice at the lowest.

Posted by: tiim5 Jun 13 2004, 12:06 AM

Has anyone tried the Cordebeau (sorry for the spelling) seats? I saw them at Porsche Heaven, they look nice are said to fit and are around $200.00 each. Any one know anything about them?

Posted by: Chris H. Jun 13 2004, 08:51 AM

As far as seats go, it seems like many people have opted to just get their seats recovered, and maybe have a little extra pad added.

There are a lot of little things you can do to a 914 interior, just depends on your taste. There are center consoles, power window kits, killer stereos, different gauges, etc.

Posted by: Andyrew Jun 13 2004, 01:46 PM

The Corbeau seats are what I have seen is the main seat that fits good and that people like alot. If I had the money, they would be in mine.

http://www.tweeks.com/shop?frame=4.90.2384

Tweeks has em, but this is just for pics and price reference. You can get them cheaper elsewhere.

Andrew

Posted by: ss6 Jun 13 2004, 02:34 PM

I have a pair of the Corbeau (Forza) seats in mine with the backpad, center cushion, and center console as well. They don't "nest" into the backpad like the stock seats do, but at 5'8" I've got plenty of extra leg room. I made my own mounts (to sit as low as possible), though I understand Corbeau sells adaptors to the stock rails.

Posted by: stevend Jun 13 2004, 02:56 PM

corbeau classic II bolt right to the 914 hardware. Some discussion on fitting into the backpad, but Im also 5'8'', so no problem. the last owner was 6'2'' and still was not an issue. The money is right they look period and are confortable and can still do track duty.

pics later

Posted by: lmcchesney Jun 13 2004, 03:21 PM

Ctrout, you can do anything your imagination can conceive. If the seats do not fit the rails, use the rails from the ones you want. They all bolt to the floor. Change the dash, up in woofers, tweeters, AC what ever. Most 914ers enjoy the designing and production. However, if you do not gain enjoyment from "fixing", just sell the 914 to an enthusiast and buy a vette, viper, Z4 or other and enjoy.
L. McC

Posted by: jim912928 Jun 13 2004, 03:48 PM

I found myself a pair of old Konig's that were made for the 914 (search around and you'll possibly find some...they are no longer made). Or, take a picture of these to an auto upholstery shop and have them build up the sides and recover! I like the headrest looking stock. Hopefully, I'll get the rest of my interior in over the next month!


Attached image(s)
Attached Image

Posted by: tiim5 Jun 13 2004, 05:08 PM

Thanks stevend, I'd love to see pics, and those Konig seats look great as well it would be nice to find a set of those around.

Posted by: Ctrout Jun 13 2004, 07:49 PM

Thanks for the replies and pics. I don't really need a 928. After all, that's a water cooled car. I am just looking for something a little more refined than a standard 914 interior. I was spoiled by riding in my former boss' boxster.

Posted by: d914 Jun 13 2004, 08:21 PM

here's stevend's seats and the start of the interior.

plain gt door pannels, from perry for my other car, and the corbeau's from my other car. Seems every thing got ripped out of the "other car".

probably going smooth vinyl on the dash to match the doors, the new large speaker covers and a sub in the passenger foot well, and some of the vw billet window cranks for a dash of color. all in t6he works.


Attached image(s)
Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)