I want to build a 914 that can swim at least as fast as a type 166 vw or the amphicar
http://en.wikipedia.org/wiki/Volkswagen_Schwimmwagen
this guy is amazing ----
http://www.thesamba.com/vw/forum/viewtopic.php?t=389726&sid=9b83d46fc2ba4a5d3b68f3cb669ebb5f
but I dont want to make it look like anything else --- just drive to the boat ramp --- go in the water do 5-10 mph and drive out ----
may need a trans with a pto --- or front trans from a 4 wheel drive car ---- with a prop shaft
or just a seadoo motor in the trunk -----with a jet drive
gallons and gallons of seam sealer!!!
laying under a parts 914 with no motor or trans with a 16 foot jon boat next to me on a trailer ---- made me think of this again after 15 years of not thinking about this -
Awesome.
Do It!
Rust won't be an issue;-)
Just re-body an Amficar. Or weld the doors shut and every other hole. Not sure how long it would float. You have your work cut out for you.
Pontoons + Jack Stands + 914
Low pressure expanding foam in the longs...
and life jackets.
.....and as much fiber-glass as possible
( no salt water)
i need an idea about how to use the 914 motror to drive a prop out the back ????
ditch the transaxle----- direct drive!!!!
Dune buggy paddle tires
The motor is not the problem to drive the prop. The transaxle is. You need a pto shaft, which means some sort of transfer case or a 4WD selectable transaxle. No would have to adapt a different transmission to the T4. Maybe one out of an Eagle or a Brat. Not sure of the drive train on those.
Zach
If i was going to that much trouble I'd rather build this:
....and pull a real boat with it.
better pics
http://www.914world.com/bbs2/index.php?showtopic=116260&mode=threaded&pid=1439415
You will be building an Unterseeboot.
https://www.youtube.com/watch?v=Rc4r4oaGs7A
https://www.youtube.com/watch?v=GU-Lbf4jGjc
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)