Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Impact wrench for the track/autox

Posted by: Randal Jul 27 2004, 04:17 PM

This looks like a good deal and it's sure easier than the old way.

Still need to torque test the studs, but getting them off and back on again would be a snap.

Drill Master 1/2 PRICE!
16V, 3/8" Cordless
Impact Wrench
90798-4VGA
Was $49.99 Now: $24.99

Posted by: SLITS Jul 27 2004, 04:32 PM

We used a large bottle of nitrogen and regular air tools. Was good for filling tires too!

Posted by: Randal Jul 27 2004, 07:03 PM

I have the same as yourself, but a cheap battery powered stud remover is pretty nice. Previously all the battery versions were really expensive.

I've actually had pretty good luck with Harbor stuff, but probably wouldn't be good in a every day usage enviroment.

Posted by: dinomium Jul 28 2004, 12:19 AM

what is the hammer torque rating? I think the Snap On we use is 300+ and it some times has a little trouble getting the hot lugs off after a 25 sprint if the charge is less than half. But it is SO nice not having to drag a hose all over the paddock. Really handy in the hot pits and grid too...