Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ drag racing

Posted by: trekkor Sep 8 2004, 09:45 PM

I went over to The Racer's Group again today. They have an awesome 914-6 3.6 track car in their garage right now that I will photogragh tommorow.

I stayed to watch the drive up and run drag races.

Why doesn't anyone run their 914's on the strip?

914club drag racing idea.gif 10 or more cars would be interesting wouldn't it?

Honda Civics were doing 14's all night long.

What's the time on a stock 914, again? 17-18?

Who cares if we're slow, it's dial in anyway.
Consistancy wins. Not speed.

VERY SAFE fun, unless you run a 9.5 sec motorcycle. unsure.gif Saw more than one tonight.

KT

Posted by: McMark Sep 8 2004, 09:55 PM

The Bug-O-Rama drags were pretty unbelievable. Definitely inspiring.

Posted by: trekkor Sep 8 2004, 10:09 PM

Yes, some steel bodied Bug's can get into the 11's or better.

I like the sounds. When the tone is just right and your ear hairs stand out straight, tickling your brain. lol2.gif

KT

Posted by: wheelo Sep 9 2004, 01:47 AM

AAAHHH...Yes !
Love those sounds, on a warm night!
brings-back memories of OCIR qualifing runs ....
VVVVVRRRRROOOOOOMMMMMM !!!!
you are correct, VW-Super Gas =
215 hp @ 11.5 sec.1/4mi.
beats my 914 into the dirt.....

smoke.gif

P.S.- need dial-in and engine classes - M.M.

Posted by: Mr.C Sep 9 2004, 05:45 AM

Yep I can remember living on the southern edge of Sonoma a few miles away listening to the drags. I regret that I never went. I was too much into beerchug.gif back then to care.

Posted by: slugmika Sep 9 2004, 06:05 AM

Hi you all!

We have our final race in following saturday. Sunday there will be a test day for drag cars at the same track.
If my track car survive's the track race, we will make a drag racer out of it for sunday.
Car is 914 with 3.2 engine and close ratio gearbox.

-Mika-

ps. friend of mine with street bug did 9.8second pass last weekend, and yes it sounds really cool.

Posted by: seanery Sep 9 2004, 08:01 AM

If you've never been to an NHRA event you must go.
It's insane!

The feeling come through the ground as the cars do their prerun burnouts, then the relative quiet as the cars stage and then the deafening roar and the pulsing of the ground begins as the lights turn green.

You've really gotta go. driving.gif

Posted by: slugmika Sep 13 2004, 02:05 AM

1st. run
13.3 and 175.2km/h
Spinning the 1st. and hitted to rev limiter in second.
Street tires and wet clued track.

2nd run
found a cood rubbery place and car launched really hard for about 3meters then heard a loud bang from the gearbox.
It seems that the stub axle (or what it is called) from the gearbox side is broken.

Now it is time to put the car in the garage and start the rear end modifications.

-Mika-

Posted by: slugmika Sep 14 2004, 04:48 AM

Toasted!


Attached image(s)
Attached Image

Posted by: Tom Perso Sep 14 2004, 05:37 AM

LOL

If it's worth doing, it's worth doing right... smile.gif

Nice job! And one quick car!!!

Later,
Tom

Posted by: slugmika Sep 14 2004, 05:55 AM

I dont know if it was worth that, but it sure was fun driving.gif

Next season i will have LSD so i hope that wouldn't happen again.
Saldo of this season was:
6 cv. joints
3 rear end's
pair of trailing arm's, and lots of cf panels.

-Mika-

Posted by: Britain Smith Sep 14 2004, 10:07 AM

Is that a 901 or 915?

Posted by: 914Timo Sep 15 2004, 01:32 AM

QUOTE
Is that a 901 or 915?


I am not Mika, but I know it is 901.

Posted by: ArtechnikA Sep 15 2004, 05:16 AM

QUOTE(slugmika @ Sep 14 2004, 03:55 AM)
Next season i will have LSD so i hope that wouldn't happen again.

you are never going to make a 901 last behind a 3,6 in drag racing service.
overhung 1st is a non-starter.

LSD is a decent idea, but you might as well get a spool. lighter, stronger, cheaper, unless you use a factory titanium part. head straight to a 930 box with the 935 spool...

Posted by: slugmika Sep 15 2004, 05:36 AM

Hi

Yes it is a 901.
I don't think i will be drag racing so much. I just needed to beat our clubs
"wannabe drag racer's" record and doing 13.3 was enough.

btw, the clucth axle was also in two pieces.



-Mika-

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)