Just to check
red from power to the +
ground to -
sender to other terminal
tried to tachs and no work.
My tach has :
"+12" [blank] "1" "-"
The red/white wire goes to "+12", the black/purple signal wire goes to "1", and ground goes to "-".
Make sure the signal wire connects to the points connection on the coil--that's the "-" one on the coil!
--DD
Glad you got the tach prob takin care of good luck this weekend
Excellent!
Let me know how it works. I'm thinking of replacing my "bouncey" OEM.
Which FLAPS, Brand & Price?
Good luck this weekend!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)