How many of you have Porsche 3.6L engines?
Is it a 964 or 993?
Does any one have a Euro 993 3.6 (solid lifter)?
How did you modify the rest of your car to handle the power?
POST PICTURES!
I'll assume you've all seen enough of mine, but if any one wants to see anything specific, let me know.
I'm in the midst of a 964 based 3.6 conversion. I'm going to be using a 915 wevo configured tranny w/limited slip and 930 syncros. Haven't settled on an oil cooler setup yet, still brain storming. I have some pics on an older thread that show sheetmetal mods, flipping the intake runners to make it fit in the engine bay without hackery, pulley mods, european racing headers, etc...
Also, Search on posts from "Ron S", he's about a year ahead of me doing a 3.6 job and has posted some excellent project/progress pics.
I have an orignal 70 914-6 with 1995 993 3.6L. It fits in the engine bay without any modifications to the body. It has the 915 gear box with a Wevo sideshift, shifter and shift linkages. It also has 993TT brakes and a few other goodies.
Wild 6
Don't want to hijack the thread, but I heard (from Brad Roberts) that the 3.6 doesn't fit in w/o body mods. Does the intake hit (since the rest of the block is the same) or the distributor? A carbed 3.6 would solve one of those problems. Wild 6, Tell us how it fit.
Tnx,
SMD
I have one in the 911 SC....fun.
Yep. His car was at HPH several years back...
I dont recall telling anyone that the body needed modified (unless you use a Varioram 3.6) then some cutting is needed.
EastCoaster... please call. I need to talk to you about the synchro rings. We are putting the tranny together today (waiting on synchro rings)
650-364-6234
B
Oh.. the car pictured above was the first 914 to get the WEVO shift setup (test car)
B
The engine install was performed by Chris at Bauer Porsche in Oakland. You do not have to cut the body (or trunk). You can see the car at all of the Arizona PCA autocrosses and DE events. I will try to post engine pics later.
The car was originally owned by a dentist ( Alan) in AZ and was sold to a SF, CA buyer (Tobias) who participated in many Golden Gate region AXs. I bought the car and brought it back home to AZ. I have been working on it ever since.
Wild 6
Wild 6 had his car out for our September breakfast and run. Awsome car. Very nice sounding!
Wild 6, will you be able to make the Dec 5 breakfast/toys for tots run to Casa Grande?
Ernie King has/had a 3.8RSR built motor in his 914....this is the silver /6 that was for sale on and off for a few years.....he wanted 40K or so for it....worth it in my opinion
I have a rather warm 3.2 in my 914, does that count?
I considered asking about 3.2s and 3.6s when I posted this topic, so let's go with that.
Let's see 'em. 3.2 guys join in.
I just checked, my car has no 3.6.
M
Me too... Just a lowly 5.7...
Yep,it's a 3.6 993
Gettin close to puttin fire in the hole,but can't do it yet.
Here's whats left.
A muffler that's not too too loud.
Oiling system hooked up from engine to oilbag.
A redo on my fuel pump.I'm considering an Aeromotive unit.
Lastly,getting a JWest shifter and all linkage to row the box.
Ron
Attached image(s)
Hey......I think that's where mine came from too! Although it's a 964 3.6.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)