Yes I searched, yes I read my manual, no I can't find the torque setting for the three bolts that hold the cooling fan on.
Best I can tell from what I found was 14 Ft/lb but that seems fairly light.
Thanks,
Len
From Tom Wilsons book;
hub to crankshaft---23 ft lbs
fan to hub----------14 ft lbs
I've never had one come loose at 14.
......Never used a torque wrench on 1(fan hub)& never
had 1 come loose(good & snug) (use a torque wrench for your own peace of mind!)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)