Hey, I need the part numbers for the left and right window guide caps. Here's a picture. It's part #20.
EDIT: Read below. Can anyone make these pieces since the left side is NLA?
Attached image(s)
914 542 173 10 Left side
914 542 174 10 Right side
Thanks Demick!
Damn, looks like the left side is unavailable.
What are they made of?
Hard plastic that I bet you could duplicate, Bruce
Yeah, they are hard plastic. Somebody's gotta make these.
What is it with parts like these, L & R sides. One side doesn't continue to be produced.
It's not that they stop producing one side only. They have likely stopped producing both sides, but there is remaining stock of one side (people bought more left sides than right sides, so the left ran out sooner). Once the right side runs out, it will be NLA as well.
Demick
figure the left side of the car normally gets more use and attention...so parts will be bought more often for the drivers side....
Someone should fab them out of aluminum and then anodize them black. either that or find something similar to replace them with that is still made.
Who made the plastic rear trunk targa holders? I forget. This part is definitely a 914 niche that needs to be filled. I'll sign up for 3 sets right now.
I'm going to change the topic title since this thread has morphed.
QUOTE (McMark @ Jan 10 2005, 11:35 AM) |
Who made the plastic rear trunk targa holders? I forget. This part is definitely a 914 niche that needs to be filled. I'll sign up for 3 sets right now. I'm going to change the topic title since this thread has morphed. |
Ah! And he's already enlightened as to this thread. EXELLECT! What, WTF did I just type?!?!? How about, EXCELLENT!
I need those door parts, too. I think I heard that they are two types -- one for earlier doors, one for later doors.
You're right there are two styles. The early ones are NLA on both sides.
I'll have to see what shape the ones I have on the spare doors I have are first. When did they make the change? One style for 70 -72? Another for 73-76? (I'm at work and don't have access to the PET)
Your years are correct according to PelicanParts.
Here's the early one.
Attached image(s)
I'll make 'em out of carbon fiber.
(just kidding, DON'T try to order them.)
Paul
I'll take 20 in CF. Thanks Paul! PayPal sent!
I had this same problem last year... I found the left side one on a parts car.. so you may want to see if some shop has a parts car that will let you grab one from. I dont think that metal or CF (and I know you were mostly kidding..) would work because its a pretty tight fit to get them in place and you need a little give from the plastic to make it fit.
how much do they cost, or at least the one you can still get, i could make for 20 a set including shipping
after 10 sets 15 a set
Pelican shows them as $7.95 (for the available one)
QUOTE (McMark @ Jan 10 2005, 11:14 AM) |
Here's the early one. |
I definitely need a set of early units. I would pay any reasonable price.
QUOTE (7391420 @ Jan 10 2005, 01:23 PM) |
I dont think that metal or CF (and I know you were mostly kidding..) would work |
Nobody's making CF ones. Except the imaginary kind.
I was working on door seals today and took this picture. This is why we need these parts. It fills in the gap.
Attached image(s)
I lucked out and got a brand new pair of early ones last year from sombody over on rennlist. The Cap'n spotted them & suggested I snag 'em. Glad now that he did.
Good we can use yours for making molds. You were volunteering, right?
QUOTE (McMark @ Jan 10 2005, 11:36 PM) |
Good we can use yours for making molds. ![]() ![]() |
Im in too, I just noticed I dont have any on mine right now. Not to say that there isnt a set in the box on the shelf. I have hundreds of new parts sitting in a box waiting to be put on the car. One of these days, I will go through the box and see whats in there.
I'm in for a set of the later ones.
My left was missing when I got my car. Two parts cars later, still missing. I'm in.
Let me know if someone make a set of the later style. I definatly need the left side one ( sounds like the window will break every time I close the door). I will check tonight for I might need the right one to ( never been a passenger in my toy )
I did a little research over lunch and found a place that sells a plastic mold making kit. I ordered one and will try to make a mold of the RH guide (I have a new one). If successful, I will post results. Then I will need someone to lend me a LH guide to make a mold pattern from. My understanding is that the part won’t be harmed when making the mold as the mold is made from a two part silicon rubber.
If this all works I will offer the LH and RH guides for sale. Doesn't look like the cost will be much more than what the NLA parts were selling for.
Buy the mold realise agent or your new part might end up stuck.
Gee now there will be 3 of us making them....we will never run out of them now.
Feed that market, it makes for competitive business. The American way!!
MMMMMMmmmmmmmm.........
Stoners mold release.........
Nothing works better. Great name too!
Use it on all prototypes at work. Those annoying catches, binds and squeeks just go away.
Oh yeah, killer mold release, I 'd steal er..... borrow a can from the molding guys in the model shop.
If Jake used it in all his engines, I bet they could turn another 1000 rpm....
No, wait! It's the secret cam/lifter anti-wear spray!
Ken
QUOTE (GWN7 @ Jan 11 2005, 02:11 PM) |
Buy the mold realise agent or your new part might end up stuck. Gee now there will be 3 of us making them....we will never run out of them now. ![]() |
QUOTE (skline @ Jan 11 2005, 02:14 PM) |
Feed that market, it makes for competitive business. The American way!! |
QUOTE (McMark @ Jan 11 2005, 06:32 PM) |
I'm putting my money in with Bruce because I've seen his previous plastic work and am pleased. :) |
Please do post pic's and let us know when something is available for order. Would like a set of the later model parts.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)