still looking for studs for My brothers 914 to convert his four bolt hubs to five bolt, or the early 911 hubs and stuff from
The Posche guys in Vancouver want 16 bucks to 25 bucks a stud,
sounded kinda fanciful as far as pricing goes...
Any body got any to sell? or price on early 911 hubs
I take donations too.... oh well it was worth a try
Steve
sspeters@shaw.ca
is that to drill and press in new studs?
Eric Shea sells 'em already done and so does GPR
if you only want the studs...you have the answers to your own post you asked a few days ago
that is the cost of the studs, in a plastic bag....
Gpr you say? do you have a web site or a phone number,
as for the studs... the dude said he couldn't find them in his shop.... so im am still looking/ the machining is not a problem it is finding the studs or an alternative hub
http://www.gprparts.com/
Pelican Parts as well as High Performance House have these parts as well.....
You should look 'em all up on the web and check them out....
thanks for the link, is the gokart your driver, as your fourteen is on jackstands,.... I believe 911s should be on jackstands as donor cars for our fourteens....
Who couldn't find them in his shop? Motorsport? Pelican can get Verbus studs... You can get EMPI studs as well. Some people give them a bad rap but I've never seen one or heard of one fail. I've both seen and heard of them fail because the "idiot operator" drilled the hub with a hand drill .
You can get ten (10) EMPI studs from http://www.CIP1.com for roughly $18.00 plus shipping.
QUOTE |
still looking for studs for My brothers 914 to convert his four bolt hubs to five bolt, or the early 911 hubs |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)