As per title: I took my 914 out for the first time. And, my first drive in a 914. In fact in any Porsche! And... I love it!
Over the last few months, we (the guys at the workshop and I) have been busy rebuilding the engine. It started as a small job - just replacing the pushrod tube seals... it ended as a full fletch: 'the engine is out and why not tackle all?' job.
In the mean time, we searched high and low for rust. And, due to the fact that the car was treated with ML Tectyl (A Swedish wax brand) when it was new, all we had to do was touching up some paint. (3M stone chip coating + a respray). Oh well, I've written about it all. And a respray of the boot under the spare tire.
So, after dinner, I took my daily driver down to the workshop and pulled the car out for a spin. A short spin. The tires on the rims are old, very old... the production date was 1977! 38 y/o tires indeed. The new Vredesteins will arrive tomorrow.
The car runs fine. Some hesitation at low speed, but I don't know how old the fuel in the tank really is! New fuel does cure this sort of problems when I pull my Triumph TR out of hibernation. So there's a chance that it will be gone with new fuel. But the sound when hitting the >4K rpm!
Two questions after the 10 mile trip: the engine temp gauge works - more or less. The needle lifts starts to move, but stops at the very beginning of the scale. Any idea?
Second, the car needs to be 'pointed': steering is not slack, I think. The front end feel light and wanders (is that the correct phrase in English?) a little. Perhaps fresh tires will cure this. Must add that we've lowered the front end about 1 - 1.5". So perhaps a wheel alignement will also help. Any thoughts?
And then the pics, taken in front of the workshop, only minutes after the trip!
http://s211.photobucket.com/user/TR3A1959/media/Porsche%20914/temporary_zpstpcxynvr.jpg.html
http://s211.photobucket.com/user/TR3A1959/media/Porsche%20914/temporary_zpsl3sazc0i.jpg.html
http://s211.photobucket.com/user/TR3A1959/media/Porsche%20914/temporary_zpsbpsgbyeg.jpg.html
Since the paint looks good from a 20 ft distance, I am considering leaving the hub caps off, giving the car a more or less Outlaw look. Again, any thoughts?
Menno
First, congrats!
Secondly, don't drive on OLD fuel! That is asking for a lot of trouble...
Yes on the alignment after you get the new tires on there. Make sure you get a full 4 wheel alignment at a shop who KNOWS how to align old air-cooled Porsches and has the correct shims on hand for the rear!
Your average alignment shop will not know how to do this.
Also, i personally like the look of the steel wheels with the hub caps. So my vote is to keep them on there.
Ditto! Nice looking teener. Feel free to add some video of the drive once you get the tires/alignment done.
Enjoy!
Alright!
I too like the look with the steel wheels and 'caps. Has a nice classic look to it.
Very nice Menno! + 1 more on old fuel & classic steel wheels with hubcaps!
If that's the way it came, then keep it true to it's roots, or at least save those wheels if you really really want others on there!
& where is Pat Garvey!!?? .... note the rear fog light!!!
Cheers!
Tom
///////
Nice! Think about the stainless steel fuel lines from Tangerine Racing. Like the hubcaps on better than off. Enjoy your car!
Ian Stott
Moncton
Canada
Awesome! As Sir_Andy said, you need to align at least the front end if you've lowered the car. The front end is likely now in toe-out condition.
There are methods to do alignment in your garage which will at least get the alignment close until you can visit a true alignment shop. The string alignment method is described on Pelican Parts tech section.
The hub caps are classy. Keep 'em. Congrats on your accomplishment. Nice work. What name did you give your car?
Gorgeous car! I'm super partial to silver, but it looks amazing with the hubcaps. very classy.
Is that your shop in the background?...nice architecture too!
Congrats on a such a nice silver 914! Enjoy!
Other car looks great just the way it stands. I concur with the other advice and would like to add that tire air pressure is important on these cars too.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)