Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ i need this ...

Posted by: SirAndy May 7 2005, 08:09 PM

i need the sheetmetal part pictured below, both, left and right.

anybody got a straight front clip lying around?
drilled out spot welds would be perfect!

Andy

Attached image(s)

Posted by: TimT May 7 2005, 08:14 PM

hehehe see my recent sheet metal thread

Posted by: Mueller May 7 2005, 08:18 PM

if I ever get the front clip back from the SMPD I think those are still intact....

Posted by: SirAndy May 7 2005, 08:30 PM

QUOTE (Mueller @ May 7 2005, 06:18 PM)
if I ever get the front clip back from the SMPD I think those are still intact....

hey guys, are you reading this?

put down the donuts and get mike his clip back!
Andy

Posted by: trekkor May 7 2005, 08:47 PM

Which car are you getting the parts for?

Mark may have the parts for you.

KT

Posted by: McMark May 7 2005, 08:48 PM

Nope. I need those for Blackie. Sorry.

Posted by: neo914-6 May 7 2005, 08:56 PM

QUOTE (SirAndy @ May 7 2005, 06:30 PM)

QUOTE (Mueller @ May 7 2005, 06:18 PM)
if I ever get the front clip back from the SMPD I think those are still intact....

hey guys, are you reading this?

put down the donuts and get mike his clip back!
Andy

Mike's a high risk target...

Posted by: morphenspectra May 7 2005, 09:47 PM

to bad youre so far south i got a 73 & a 71 on the scrap trailer with those parts.i would give them to you if you could come & get em if i got to take them off it will take up a bunch of my time.sorry if i sound like a capitolist.

Attached image(s)

Posted by: morphenspectra May 7 2005, 09:48 PM

other

Attached image(s)

Posted by: Aaron Cox May 7 2005, 09:59 PM

andy? why do you need those? what happened

Posted by: SirAndy May 7 2005, 11:02 PM

QUOTE (morphenspectra @ May 7 2005, 07:47 PM)
sorry if i sound like a capitolist.

hey, i never said i wanted them for *free* ...
i'll pay if it's within reason!

why i need them? DPO went after them with a blow-torch!

the big holes just keep on bugging me every time i look at them ...
Andy

PS: just look at the pic i posted above, that actually *IS* my car before the "makeover" ...

Posted by: Martin Baker May 7 2005, 11:10 PM

I have a 71 that has them, car has a good front end, you can come and take them off for free. I am going to cut up the car...

Posted by: mk114 May 7 2005, 11:12 PM

Hey I have it for free ( well for shipping will be cutting car up Next sunday mine is str8 and will verify no rust after the cut if you want it it's yours

Attached image(s)

Posted by: SirAndy May 7 2005, 11:18 PM

QUOTE (Martin Baker @ May 7 2005, 09:10 PM)
I have a 71 that has them, car has a good front end, you can come and take them off for free. I am going to cut up the car...

hey, roadtrip! when are cutting the car up?

Andy

Posted by: mk114 May 7 2005, 11:19 PM

Sunday May 15th

some parts are spoken for but what your descibbing is not

Posted by: SirAndy May 7 2005, 11:19 PM

QUOTE (mk114 @ May 7 2005, 09:12 PM)
Hey I have it for free ( well for shipping will be cutting car up Next sunday mine is str8 and will verify no rust after the cut if you want it it's yours

i'll see if martin's works out (he's local), if not, i'll get back to you ...

thanks anyways!
Andy

Posted by: North Bay 914 May 7 2005, 11:21 PM

I am home tomorrow, all day...707 685 6710.

Posted by: SirAndy May 7 2005, 11:21 PM

QUOTE (mk114 @ May 7 2005, 09:19 PM)
some parts are spoken for but what your descibbing is not

how about the right (pass.) rear part of the fender, where they all rust (behind the foam piece) ...

is that still solid on yours?
Andy

Posted by: SirAndy May 7 2005, 11:22 PM

QUOTE (North Bay 914 @ May 7 2005, 09:21 PM)
I am home tomorrow, all day...707 685 6710.

hmmm, quick run to home depot to get a spotweld drill bit and load up the makita ...

what time would work for you? (don't want to disturb your weekend beauty sleep) ...
Andy

Posted by: Martin Baker May 7 2005, 11:28 PM

The car is good body wise, I'll be here all day man, any time is good for me...I'll be working on my car as well. I have all the tools you will need, but bring anything you like. I may have a spot bit, not sure, but I did buy a Dr. Drill bit machine today. F'r is awesome ! No more dull bits for me...

Posted by: jonwatts May 7 2005, 11:34 PM

Are you doing metal work on the chassis after just having it painted? Not sure if that's dedication or a chemical imbalance (I know what I have, just not sure what you have).

Posted by: SirAndy May 7 2005, 11:42 PM

QUOTE (jonwatts @ May 7 2005, 09:34 PM)
Are you doing metal work on the chassis after just having it painted?

well, it's been 1 1/2 years and the paint is cracking EVERYWHERE ...

my *expert* advice, do NOT do single stage repaints, always get at least one coat of clear.
basically, the $5500 are out the window, which kinda sucks big time ...

sooooo, i'm ready to tackle some of the welding issues i should have taken care of before the paint.
i see another repaint in my not so distant future ...

Andy

Posted by: SirAndy May 7 2005, 11:43 PM

QUOTE (Martin Baker @ May 7 2005, 09:28 PM)
any time is good for me...I'll be working on my car as well. I have all the tools you will need, but bring anything you like.

schweet! i'll give you a call before i leave.

i'm going to sleep in, so it's going to be early afternoon-ish ...
Andy

Posted by: Aaron Cox May 7 2005, 11:44 PM

that fuckin sucks.....

is it because the glass is flexing? thus cracking the paint?

Posted by: SirAndy May 7 2005, 11:52 PM

QUOTE (Aaron Cox @ May 7 2005, 09:44 PM)
that fuckin sucks.....
is it because the glass is flexing? thus cracking the paint?

haha, nope. unless they made a uni-glass-body 914 ....

it's cracking "everywhere", cowl, hoods, doors, sail panels, fenders ...
in fact, it looks like the paint holds better on the FG parts than on the metal parts ...

Andy

Posted by: GWN7 May 8 2005, 01:19 AM

Take it back to the shop that did it. The manufacture of the paint "might" come thur on a repaint for you. If you don't complain you will never know.

Posted by: mk114 May 8 2005, 01:26 AM

no my passenger rear is detroyed by rust (hell hole) and was hit hard in the pass rear

Posted by: Verruckt May 8 2005, 06:41 AM

Michael, on the car you are cutting up, how is the front trunk seal channel? I will be needing various pieces. Would you be willing to cut out certian sections for me? Shoot me a price if you could do this.

Posted by: mk114 May 8 2005, 12:22 PM

well I personally need the front channel but if you need the rest I can make the cuts for you for free

Attached image(s)

Posted by: Verruckt May 8 2005, 04:43 PM

QUOTE (mk114 @ May 8 2005, 12:22 PM)
well I personally need the front channel but if you need the rest I can make the cuts for you for free

Well, I need that too.. but can make do somewhere else on that. If I pm you some shots of the areas I need to you think you could do some special sawzall stuff for me?

Posted by: mk114 May 8 2005, 08:41 PM

yes if not take already just send me what you need

Posted by: Brent May 10 2005, 12:00 AM

Andy, Here's the car I found out Pick your parts in Milpitas.

Attached image(s)

Posted by: SirAndy May 10 2005, 10:12 AM

QUOTE (Brent @ May 9 2005, 10:00 PM)
Andy, Here's the car I found out Pick your parts in Milpitas.

thanks! i'd prefer an early car tho, i don't need (or want) that top brace ...

Andy

Posted by: Brent May 10 2005, 01:28 PM

Don't want more work for yourself, and keep the weight down, good insight.

Posted by: Series9 May 10 2005, 01:31 PM

Here's a parts car:

http://www.914world.com/bbs2/index.php?act=ST&f=2&t=30987&hl=

Posted by: Brent May 10 2005, 01:36 PM

QUOTE (914RS @ May 10 2005, 11:31 AM)
Here's a parts car:

http://www.914world.com/bbs2/index.php?act=ST&f=2&t=30987&hl=

...thats road kill.

Posted by: Verruckt May 10 2005, 03:25 PM

QUOTE (914RS @ May 10 2005, 01:31 PM)
Here's a parts car:

http://www.914world.com/bbs2/index.php?act=ST&f=2&t=30987&hl=

As in 'parts are missing' ???

Posted by: Leo Imperial May 10 2005, 05:44 PM

Andy,

I have access to a roller in Alameda. Haven't taken it because I have no room. We could probably make arrangements to pick it up on Sat. after the auto-cross event.
PM me or call me if you are interested.

Leo