Subject pretty well says it all - Search button no help here.
I know there are 3 thicknesses, but does anyone know how much adjustment results from each?
I put about a touch less than a 1/4 degree additional negative camber into my car by removing a .85" shim. So I figure somewhere in the .170-.200 range.
I'm getting an alignment this week, and I just happened to look into this.
1mm of shim thickness = 10minutes of positive camber.
Hope that helps.
So...
1mm = 10 minutes, 60 minutes = 1 degree, 6mm = 1 degree?
Therefore
3mm = .5 degree. 3 / 25.4 = .118"?
Off the top of my head.
Length of ear to outter mount is 12 in (I'd double check this number). 12 X tan of .5 deg (.008726) = .104722 in.
QUOTE (J P Stein @ May 10 2005, 08:15 AM) |
Length of ear to outter mount is 12 in (I'd double check this number). 12 X tan of .5 deg (.008726) = .104722 in. |
You guys impress me with your math skills, good to know people use thier minds. I thought it was a lost art.
Ya, what Andy said! Metric rocks!!!
QUOTE (SirAndy @ May 10 2005, 09:22 AM) |
ever thought about using metric? |
Thanks guys. Just the info I needed for this evening's project.
And even though I own a metric ruler, I'm stayin' away from the political side of this debate.
Not me.
Roslyn Carter tried to get Jimmy to have the US adopt the millimeter system.
QUOTE (SirAndy @ May 10 2005, 08:22 AM) |
guys, ever thought about using metric? it would make your live soooo much easier. |
QUOTE (J P Stein @ May 10 2005, 10:24 AM) |
No. You had your chance to convert us, but blew it. We don't use German, Spanish, or French as our native language either....I spose you have a problem with that also. |
a quick search revealed this:
http://ts.nist.gov/ts/htdocs/200/202/lc1136a.htm
ok, so it was 1975 and not 1978. oh well. i was close tho ...
Andy
You are misinformed on my being misinformed. I lived thru the debte and the result.
Metric is easy when it comes to length (its just Xmm * .0393716 = Y in). What I hate is when you're expected to know the metric and SI units of Force, AND the two constants in different equations. Now thats just excessive...
Typicially what I have seen is 1 mm = about .25 degress. That was a couple of years ago when I had mine done.
M
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)