I have a 1983 911SC 3.0L I want to put in my 1974 914-4. Does anyone know where I can find a flywheel? Pelican Parts has the item listed, but says no longer available.
thanks
Welcome Mr. Shady, check here:
http://www.kennedyeng.com/index.htm
http://www.patrickmotorsports.com/
And welcome to the 914b Club of Addiction.
Welcome! A 3.0 should be a lot of fun. I've used Kennedy before and had great results, even with me calling them up and asking dumb questions.
Use the stock flywheel and call KEP about a 9" starter ring and clutch/pressure plate.
This is what I will be using with my 3.0
Grady, Kennedy is the ticket , owners name is Hobert- a little slow talkin' but a fountain of information They make the stuff either on new billet, or modified F&S oe parts. If you buy from an outsource specialist...99% of the parts come from here.
Good talking to you today !
Marty
BTW WELCOME!
If you want a 3.0 flywheel I have a used one. Other wise do what the others have sugguested.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)