Is there a place in Sacramento you can get metal bumpers straightened?
I hear Sherms Plating in Sac does good work. I sent them some pics of a front bumper that needed a few dings removed and chrome plating, they sent me a quote of $750. I figured that wasn’t too bad. Oh, and they said it would take approximately three months.
I just need them straightened. Going to paint them.
Then any competent body shop. And with paint you can use filler for the final surface smoothing, so should be much faster and cheaper.
Classic Chrome on Franklin
I used AAAbumper repair over by McClellan.
Oscar offered to straighten and paint black my pair for 2 bills back during his mass re-chroming group offer.
I didn't realize there were some many choices here in Sac.
I already have nice set chrome bumpers but I do need a couple of small parts chromed.
@http://www.914world.com/bbs2/index.php?showuser=3380
Rob wasn't there a small chrome shop here that you and Mark used?
Jim
Thanks for all the responses!
A few good chrome shops remain. I’ve heard the shop in Utah does great work. No idea on cost.
In my case, I did a large GB of Early Bumper repair & re-chroming. Ultimately finished about 130 bumpers. Great results, but hated the lead-times. Sometimes it took two weeks, other times over six weeks. I started by pressure washing, bead blasting, repair to re-thread M8 mounting points, and checked for straightness against a jig Bruce Stone and I made. Then I would send them over to the chrome shop for triple chrome.
Chrome shop has had a few issues with turn-over during the past year so It’s difficult to keep up with my expected quality.
I have 7 bumpers in queue for a mid-west member. Bruce Stone and I have 3 bumpers at chome now. Should have them back any day.
Bottom line, if you a nice straight bumper with no dents that just need re-chroming, and maybe thread repair. I can handle refurbishment for less than $400. Currently, I’m not accepting overly rusty or dented bumpers. Straight bumpers are a breeze. Few dents are okay too.
Let me know if I can help.
BTW... @http://www.914world.com/bbs2/index.php?showuser=9892 is the go-to guy for GT opening modifications prior to chrome.
O
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)