Had a chance to pull the 914 out from storage today. It was there too long given some family events demanding my time this year.
1973 2.0 Bahia red. All original. 47k miles. I’ve owned it for about 8 years now. Original owner had it for 41 years.
The last two times I’ve taken it out of storage several injectors leaked at the seals. A couple sealed themselves after some careful running of the engine at idle but I had to replace seals on one injector. Is this typical when taking these cars out of storage? I lived in Atlanta for the first six years so the car was never in longer term storage.
Enjoy your summer driving.
Attached thumbnail(s)
love the high stance of a new (like new) 914
Love to see the Wisconsin 914 crew!! Car looks great!
Attached image(s)
Yes, another beautiful 914 example in WI. thanks for posting. Mark
Beautiful 914 for sure. I wouldn't call the injector seal leak "typical" after storage but it's not an uncommon, either.
Mine has done the same thing yours did. Now part of my process the first couple of times i get it out at the beginning of the season is to just let it idle for 10 mins and just take a good look around the engine bay.
Nice car. Same red as my six conversion. Today was certainly teener weather. I spent it cutting out rust and removing rubber sealant from the ‘76. For those living elsewhere, you can be sure it won’t snow in June July or August here. I am a transplant but I have seen snow here in southern Wisconsin in every other month. As Janis would sing “Get it while you can “.
Absolutely beautiful.
What a cool time capsule!
But you are missing all the fun of replacing half the sheet metal and renovating a worn out engine.
Its a great day when you can take your Porsche to work...and you work at a Porsche Race shop (KMRR).
Well, one injector sealed itself….must have been the seals rather than the injector. The other one still leaked with new seals so I put a new nos injector in it. Fired it up and no leaks although it idled At 2500. Drove it a bit thinking the idle might drop. Looked around and realized a vacuum hose had been knocked off while I was working. All is good.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)