Where is the switch that turns off the reverse light? It’s the last thing that I need to have to get my car ready for restoring its salvage title. Do I need the reverse lights to pass the tier 3 examination in AZ? I have all other lights working but the reverse lights get no signal from whatever is supposed to turn them on, but they do work.
Test it by connecting the two terminals with the ignition on. The back up lights should come on. If they do not check the wires for power. One should have power. The switch is about $80. It does not often go bad. It has a pin that pushes into it to close the circuit. The pin can get worn down. And check the bulbs and sockets in the light housings.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)