Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Pull Rod Length

Posted by: DennisV May 19 2024, 12:15 PM

Can anyone tell me the length of part number 901-108-648-00? It is #19 in the parts book diagram for 914-6 Weber IDTP carbs pull rod. Thanks.

Attached Image

Posted by: rgalla9146 May 19 2024, 05:13 PM

Dennis I believe the one at the top with the fixed nut on the shaft is OE '6' It has infinite adjustment 'in place' with reverse thread in one end.

The others would work too.

Attached thumbnail(s)

Posted by: DennisV May 20 2024, 08:14 AM

QUOTE(rgalla9146 @ May 19 2024, 04:13 PM)

Dennis I believe the one at the top with the fixed nut on the shaft is OE '6' It has infinite adjustment 'in place' with reverse thread in one end.

The others would work too.

Super helpful! I appreciate you taking time to post this.

Thanks for pointing out the fixed nut. I am guessing that is the #26 push rod if you trust the parts catalog drawing. The other two the pull rod #19.