There's a lot of B in this car!!!
Attached File(s)
ax3pict2 ( 31.96k )
Number of downloads: 0
blah
Attached File(s)
ax3pict1 ( 33.02k )
Number of downloads: 0
blah blah
Attached File(s)
ax3pict3 ( 39.08k )
Number of downloads: 0
blah blah blah
Attached File(s)
ax3pict4 ( 41.97k )
Number of downloads: 0
Looking good Rob, car looks like its handling right.
I'm thinking about showing up the next LPR Autocross. If I grovel enough can I have another ride?.
Looks good...and low!
what is your ride height? and your suspension setup + alignment #'s if you got em handy? or just point me to the thread where you already said all of this
Thanks,
Tony
I'm not quite sure. It's low though, mainly due to the tires and 140 lb rear. I have to drive up onto a 2x4 to get a floor jack under the car.
The alignment is off, but was set up at the beginning of the season with 1 deg camber, and some toe in. The front suspension has an aftermarket swaybar and bilsteins. I'm also in the rear swaybar camp for AXing. I run a stock rear bar.
It's nice. All four shoes stay on the ground. Video to come once I get a new computer.
I luv pics of 914s at work.
How do I get in on the next AX? What sort of equipment do I need?
Douglas
Cool.. now I know what we need to adjust Rob.. I needed to see the car going around corner.
I spoke with Doug...we will try to make the next event.
B
I'll probably be at the next ax. Looks like it was super hot!
Maybe my eyes are playing tricks an me but those front rotors look bigger that stock. If so give us the details.
I had to go out to the garage and look at the boys car just to check.
His tire size is playing tricks on you.. they are stock.
B
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)