Printable Version of Topic

Posted by: WRX914 Feb 3 2006, 03:15 PM

This was my approach to the 911 sub problem...


Attached image(s)

Posted by: WRX914 Feb 3 2006, 03:17 PM

and my design for the 914 footwell sub...






Attached image(s)

Posted by: Crazyhippy Feb 3 2006, 03:29 PM

OOOhhh... Purdy....

Is that 911 interior pic the gray turbo? That thing is obscene. Crystal clear, until the blood coming out your ears starts to muffle it. And almost silent outside

Kim still talks about that car, and it's been a year now

BJH

Posted by: WRX914 Feb 3 2006, 04:08 PM

yup thats the one....

here is our door panel..




Attached image(s)

Posted by: jasons Feb 4 2006, 08:46 AM

Image Dynamics? Good Choice.

Posted by: bd1308 Feb 4 2006, 08:50 AM

if that footwell sub is a drop-in unit,

i'll ship you my kidney for it.

Posted by: East coaster Feb 4 2006, 01:14 PM

I'm working on a mold for a passenger side footwell sub that won't interfere with the passenger compartment. It will house an 8" sub. I'm not sure if it will work with a center console, but I don't care, I don't have one. I had one like posted above and it always freaked out passengers puting their feet on it.

Before anyone asks..........no I'm not selling these, I'm just doing it for my own project.

Here's the modified foam getting ready for mold making:




Attached image(s)

Posted by: Travis Neff Feb 5 2006, 01:41 AM

QUOTE (WRX914 @ Feb 3 2006, 01:17 PM)

and my design for the 914 footwell sub...

What's up with the bars in the car? Street type cage for stiffening, or am I seeing things

Posted by: Crazyhippy Feb 5 2006, 10:03 AM

Cars owner had some tubing, and some spare time... it's really well constructed, even if it's overkill on the street.

BJH

Posted by: bmunday Feb 5 2006, 10:17 AM

QUOTE (East coaster @ Feb 4 2006, 11:14 AM)

I'm working on a mold for a passenger side footwell sub that won't interfere with the passenger compartment. It will house an 8" sub. I'm not sure if it will work with a center console, but I don't care, I don't have one. I had one like posted above and it always freaked out passengers puting their feet on it. Before anyone asks..........no I'm not selling these, I'm just doing it for my own project. Here's the modified foam getting ready for mold making:

This might be dumb question, but couldn't you just core out thefootrest, and flush mount sub in there?Same result and it wont be in the way right?

Posted by: WRX914 Feb 6 2006, 11:26 AM

Yes, and no...

While it will work, you really do need a sealed enclosure for a sub to work properly. Additionally, you need to figure out the minimum cubic inches for each driver.

Posted by: WRX914 Feb 15 2006, 11:38 AM

Posted by: neo914-6 Feb 15 2006, 01:24 PM

Keith,

Wasn't your ID "audioculture" and are you still in RH building?

Posted by: VegasRacer Feb 15 2006, 02:25 PM

QUOTE (neo914-6 @ Feb 15 2006, 12:24 PM)

Keith, Wasn't your ID "audioculture" and are you still in RH building?

I know the answer to this one.

Yes and No. (really)

Posted by: WRX914 Feb 15 2006, 03:33 PM

QUOTE (VegasRacer @ Feb 15 2006, 12:25 PM)

QUOTE (neo914-6 @ Feb 15 2006, 12:24 PM) Keith, Wasn't your ID "audioculture" and are you still in RH building? I know the answer to this one. Yes and No. (really)

Thanks John!