914 3 Gauge Rings $77.75 Delivered to you
911/912 5 Gauge Rings $92.75 Delivered to you
52mm Auxilary Gauge Rins $10 each + $2 Shipping for a group of 3
PLEASE DOUBLE CHECK YOUR GAUGE SIZE AS THERE ARE TWO DIFFERENT SIZED SMALL GAUGES!
We need 10 orders to make this happen.
PayPal to Sean@MoronThrottle.com
Please Include 914Club username and QTY & FINISH desired.
These will be shipped overseas via a ground provider (I know, doesn't make sense over water ) and may take a while to deliver.
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=4568
Rings are offered in 3 finishes:
Polished, UnPolishied (machined) & TitanLook
Attached image(s)
What, No Takers?
I will take a set plus 2 aux. gauge rings. Let me know if you get enough people interested.
Jerry
How do these fit on? DO they slip over the original ring?
I said yes on the earlier posting. I three ring set.
CCLINGAUGERINGTOWN
I will take a set...I haven't yet decided which finish I want. Let me know when it gets closer. By the way, I need the 911 5-gauge set.
-Britain
Sean: I'll take a set for the 914 dash gauges, $77.95, and a set for the stock 914 console gauges, $ 32.00 . Can some one confirm that the stock console gauges are 52mm. I did check ,but this metric conversion still has me whiped. i want the polished sets.
$109.75 right , When do you want the money? Now? Or when you get 10 orders? let me know Dave
See you Oct. 18th
no one send money til we have 10 confirmed please.
Dave 52mm is approximately 2-1/6"
Count me in for the 3 ring set and a set of 3 rings for the console gauges, 2 1/16 according to post above those are 52mm ( I hope), but I want the rings for the 2 1/16 console gauges.
Ok, I've measured the guages from three different consoles on three different cars, and two more from consoles upstairs with my dial calipers. They all measure in at 2.357 inches. That's almost 2-3/8". That's 60.5mm.
52mm? Maybe they made some that are different from mine?
Maybe the 52mm are the aftermarket size?
yes the aftermarket ones are smaller than stock.
Back to the top.
Count me in for a three ring set!!
7 so far
I'll take a 3 ring set for the 914, brushed aluminum please (not titanium and not polished). I will also take a single 52mm ring also brushed aluminum. Thanks.
Douglas
Bump
Anyone else, come on only a couple more. Use the Paypal return from Ed and the RC 914 bodies to fund most of the cost.
I'm in for a 3 ring set for the 914, brushed aluminum also. Come on fellas only one more needed to get to 10!
Back to the Top, come on guys, only need 1 more
Dave
Brad,
are you in for one for lil black sambo?
to the top
Ok, Dave count me in for the 3 ring set.
OK, looks like we have ten.
Let's leave this go til next monday or tuesday and then I'll start collecting money for the order.
Thanks Guys!
Just let us know how/where to send the payment, thanks!
does anyone have the proper tool to "crimp" them on?
for that money, i would hate to fuck them up with pliers and screw-drivers ...
IF someone can point me to the right tool to mount, i might be in for 5 (911 gauges, remeber?)
Andy
They say you don't need a tool, just a wee bit of the double sided tape they provide.
OK, let's get the party started.
If you want 'em
send the paypal to me: sean at moronthrottle.com
We'll order them as everyone gets $ in.
Please include your 914club name in the paypal.
Are we ready to order yet. If so I will take a set of 3 for the 914.
Thanks
Van
Justin started the ball rolling.
1 order received.
add Dave (Korijo) to the paid list.
JMRuiz is on the list of paid up folks.
Seanery,
Pay Pal sent today.
Van914
Cool, that's 5 solid orders (including mine).
I spent all weekend with the US people who make these... we can get a MUCH better deal. They are based out of Florida.
If you like the Germans.. stick with them.. I'm just giving you another option.
B
JEM is IN.
what's the scoop B?
got pics?
got prices?
Barber Dave is in.
bump
trophy:
BUMP
how 'bout another?
What if we don't make 10 ??
we will, it may take longer.
Some folks who said they wanted them are away from their 'puters for a short bit.
I think we're at 7 now, so we're close.
Due to an unfortunate meeting with a dropped valve seat, I will not be able to participate in this venture.
$$$$$$$$$$$$
Bump. This was three pages deep already. We still hovering around 7 orders?
Brad - any info on the company in Florida that makes these???
Ok, count me in. Are you still collecting Paypal payments?
-Steve
yup.
Sorry, now I have to pull out. Financial problems.
Douglas
Sean,
Can you make mine the non polished brushed style, instead of the titanium look ??
TIA
dave send me an email with that info.
I've got a folder with everyone's info in it and I'll put it withem.
*bump*
Any word on if these have been ordered yet/when can we expect them. Thanks
1 3 ring set for the 914 for me
I'm waiting to hear back if they'll give us the same price for a lesser qty.
Sean Could you please list those who are on the group buy.
Thanks.
The set that I bought in Ventura from the Florida people is outstanding. Compared to a set that I purchased from Stuttgart Performance, which were as thin as tin foil, and much more costly than the ones from CARCRAFTER.
CCLINLO
Group buy is cancelled. Money returned this morning via paypal to those who paid.
We didn't get enough buyers and they jacked the price for a lower qty.
Sorry for the inconvenience.
Thanks for trying Seanery. Maybe something will work out with the Florida company.
edit: Just found them http://www.carcrafter.com/ $150 for the 914 set
Thanks,
Justin
I have been in discussion with Carcrafters, I will post later what information I have.
CCLINTALKTOWN
What are the specs on these things.
We have several shops that "may" be able to pop these things out cost effectively.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)