I have just finished designing an aluminum pedal board to replace my cracked ones in the 73 and the 74. They will be 1/4" aluminum with the holes - weight 2.6 lbs. Going to get them run locally - $48 each plus shipping if anyone else wants one. Email me in the next week.
Mark
1973 2.0 (runs beatifully)
1974 2.0 (still working on the rust removal process)
ANy chance you will make some for my 912? That is a great price compared to what other sell them for.
-Britain
I would need your old board to program it. If the 912 board is about the same size price should be about the same. Email me off list if you want to do this.
Mark
1973 (runs beautifully)
1974 (rebuilt engine is done)
Hey Mark!
Welcome to the BBS!!!!
-Rusty
Hey!!! Another Hoosier!
We're having a funrun in Nashville, Oct 18th !!!
Mark,
If you're going to keep making these.. you might want to put a post in the "914 Resources, Parts and Products" forum. It's just for members who are making a 914 related item!
-Rusty
Thanks Rusty - After being a "consultant" (read out of work) for 4 months this past year I am again gainfully employed.
I will post over to the parts board as I am also making some alignment shims. These will be in 11G, 14G and 20G material as this is close to the 3mm, 2mm, 1mm sizes. Will post some pics soon.
Mark
Got my board today. Kicks booty!!! Nice, solid, right price. Thanks Mark. Probably drop it in tomorrow.
Been driving the 914-8 aka Sasquatch quite a bit lately. Other cars were DOA, truck needed brakes, stang needs an alternator which is on order and was blocking the others. Fun to drive it once in a while. Today I had Topanga canyon both way to Santa Monica. Too bad there was so much traffic...
Make me think about the other little things I need to take care of on the car.
sm
Thanks for the comments! I will be working on something new next! Another interior part!
Mark
Hey Mark,
can I trade my black one for a silver one on the 18th?
bring stuff to sell by the way.
BTW, I did put it in. Left my digital camera at work though. Bolted right in, looks great. I cut my carpet back so it goes right under the board so the board is exposed, painted behind the board (the firewall area) black, and screwed some Momo pedal covers on the brake and clutch. Bling Bling!
sm
Sure - Bring it.
I will carry a couple extra with me. Is your 'guest' still planning on attending? I was thinking a special 914 CLUB board might be run and given to him/her.
M
sounds like it.
hey, kafer- could you post a pic of your avatar plz.
If you are making these in bulk, try listing them on ebay, I made some of these with a plasma cutter and they sold quick. I sold over 20 for 40 to 60 bucks.
I am curious about your future items.
Fly
If it's what I think it is I want a set!!!! OOOH OOH ME ME, PICK ME, I WANNA A SET!!!!
I have a picture of them in my mind because I think I saw them already. Were these at Doc n Cy's? If they were, boy did is resist big time from buying them. I am TRYING to buy only items that I NEED to get the teener running. They were SWEEEEET.
Jerry
Indy
Yep, I was there in Indy at the Doc n Cys meet. I will be going to the foilage run on the 18th as well. I urge you to attend. BTW - I did program a special 914 Club pedal board for our guest that will be presented to him at the event. It should run on a laser tomorrow.
Mark
now, about that "new" item. is this the thing you can only make 1 of?
Pictures!!!
Attached image(s)
Dangling wires under the dash cost extra.........
Attached image(s)
Nice pics!
Sean - the new item is something I have been toying with for about a year. Still have to figure out a few things on it. - I talk with you at the run and go over what I am doing.
M
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)