Printable Version of Topic

Posted by: kconway May 8 2006, 10:34 PM

I'm going to attempt to change my tranny mounts with some 911 sport mounts I got from Pelican. I think I'm removing the two small 15mm bolts that hold the mounts to the chassis while supporting the tranny with my jack? Anyway, will the old mounts just simply pull thru the ears forward? I assume I've got to drop the tranny a bit to clear the supports on the chassis, is this correct? What about the big bolt, do I gotta loosen it? What am I missing?

Thanks,
Kevin

Posted by: Mueller May 9 2006, 12:07 AM

QUOTE(kconway @ May 8 2006, 09:34 PM)

Posted by: boboli914@att.net May 9 2006, 06:52 AM

QUOTE(Mueller @ May 8 2006, 10:07 PM)

QUOTE(kconway @ May 8 2006, 09:34 PM)

I'm going to attempt to change my tranny mounts with some 911 sport mounts I got from Pelican. I think I'm removing the two small 15mm bolts that hold the mounts to the chassis while supporting the tranny with my jack? Anyway, will the old mounts just simply pull thru the ears forward? I assume I've got to drop the tranny a bit to clear the supports on the chassis, is this correct? What about the big bolt, do I gotta loosen it? What am I missing?

Thanks,
Kevin

if you don't loosen the big bolt, the mount will not seperate from the transmission

Posted by: kconway May 9 2006, 07:14 AM

Okay, so loosen the big bolt, remove the two smaller bolts and the mount slides forward and out? Looks like I've got to drop the transmission alot to get it to clear the chassis, just worried about breaking something.

Kev