GREAT SUCCESS!
Today, members of Team NARP achieved remarkable results after some officesupply engineering.
To make a splitter, go to your local UPS store, or Kinkos (Home Depot might be overkill but some prefer their selection).
You will need:
Yellow Duct Tape
Black Duct Tape
Random cardboard box
Up to 6 plastic knives for supports
A real knife for cutting the cardboard
Permanent marker for adding graphics.
The design speaks for itself, so here goes...
Attached thumbnail(s)
Now for some high speed testing. John reports that he definitely felt a good 50-55 lbs of additional downforce. AWESOME!
Attached thumbnail(s)
dude, we rock. Thanks to all for the design work, and the fabbing skills. i cannot wait to see what it does at the track!!!
cardboard - free
plastic utensils - free
nice flared six - borrowed.
Making your own sweeper dam and splitter with friends. PRICELESS.
downforce -
"Great Success"
Ok........S L O W L Y step away from the tile grout you have been smoking.....the crack is B E T T ER......
Very high smile factor. It HAS TO BE WORKING.. Of course it did retract into the bumper for stowage, an unanticipated feature.
Attached thumbnail(s)
Is the yellow to make it go faster ?
these will be available shortly, we are in process of making bulk purchase of cardboard from UPS (thanks ellyut)
we will post our downforce results inthe paddock.
High five! Great Success!
Ya know this is Trekkor's fault he startedall this Splitter on a budget crap.
Now look at this we got young'ins tryingto imitate evil genious
ours came in at around 2 lbs....
we needed 22 lbs total, so we added scuba weights and 2x4's for strength and mass.
the plastic knives/utensils acted as a great turn buckle... great for adjusting attack angle.
The next project is a set of cardboard mailing tube headers. One of the advantages is that as you drive, they get less restrictive, AND get lighter over time.
-Tony
Speechless...
Oh yes. I still hurt from laughing so hard.
man, i needed that laugh!
Andy
PS: group buy?
So anyone figure out how much downforce it creates at say 100mph??
My computations say we will need about a foot of travel on the stock torsion bars....???
Look for the original on e-bay shortly, and mass production as soon as we can pawn shipping off on Z.
BJH
Attached image(s)
High altitude testing to commence in NM next month...........
To save you a trip to snopes.com, let me give you the real story.
3 engineers and a commercial pilot took an origami class. Lacking any artistic abilities, they decided to create an aerodynamic device. The goal was cheap downforce, but without a wind tunnel (or any common sense) the device looked more like a snow shovel.
They securely (?) mounted it on a 914/6. While proud of their work, none wanted to risk the test flight. After a brief conference, they agree:
"Let's get the bartender to do it".
While there are no actual test results, it appeared to this trained eye that prior to its catastrophic failure the device caused substantial lift. With rigid materials and suitable mounting, flight may been possible. Not controlled flight, but addition of control surfaces.....
Thought you'd like to know
On the contrary, we have ample data to support our claims. In the following graph you will notice that the downforce increases monotonically with speed. What begs further investigation however is that it does not do so linearly or exponentially as one might expect.
The dramatic decrease in downforce at 30mph is due to the automatic retraction of the splitter, not a catastrophic failure as some have proposed.
- Tony
Attached thumbnail(s)
cross posted pictures....
as you can see, we are even sponsored for our R/D on the cardboard splitter.
we would like to thank Low Performance HAUS and UPS, along with costco utensils
and the build team.
I was wondering what you nuts were doing with the box...
Excellent work!!!
Comedic genious and over the top!!!
You guys need to buy some project cars, idle hands do the devil's work.
OMG! That killed me!
m
LMFAO here!!!!!!
On another note, they weren't even drinking. Scary, huh?
only during the celebration!
no one commented on the winglets????
too busy sending the winglet pics to the chineese to mass produce them....
BASTARDS!!
I absolutely cannot believe these guys were messing around while there were 914's present. One of those cars must have needed something repaired on it, and you all ignored it to play with cardboard. Shame on you!!!
Looks like you had a good time.
As Team NARP Test Driver I would like to congratulate the Engineering Team on the resounding success of the splitter project. The improvement in handling and stability was dramatic.
I would also like to thank them for answering the age old question:
"How many engineers does it take to change a light bulb?"
*(or in this case, a set of new Pilot Driving Lights from Camp914)
Hey Trekk -
What a riot.
Nice! Looks like a good time was had by all.
Thanks for sharing
The "real deal"
70-75 mph.
You can see the entire Infineon gallery over in my splitter thread in the Paddoack if you wish.
KT
now thats track tested.
i think you missed the spirit or message in the thread T
No I got it.
i thought it was hilarious and was thankful I hadn't taken a bite of food or a drink of anything carbonated.
i liked the functional roof scoop, too.
"LPH"- classic.
KT
On a serious note. Couldn't you guys throw some fiberglass cloth down on your cardboard cutouts and slop some resin on them. Then get L brackets and affix this permanently?
I think there is a potential market for cheap cardboard core performance parts for the 914. Maybe you could find a viable source of employment for yourselves?
and it can fly off and kill people on the track
trek - thanks for being a goodsport....
we all lost some pounds from laughing so hard.
too fun
i'm still giggling...
So we aren't the only ones to do cardboard ground effects....
http://home.cogeco.ca/~pteahan/92cavy/howto.htm
I like how he considers his final result "kick-ass."
-Tony
Attached image(s)
he put more time into his... but ours is Much more effective.
Ours also might be prettier...
BJH
That is some funny shit!
Thanks for bringing this back from the dead Gezzer!
Now, on a more serious note...
My first-born Bryan built a bridge out of cardboard for one of his engineering classes.
He had to span 3' at 3' high and the bridge was to be "tested to failure."
The assignment was "a bridge out of non-standard building materials."
You could have 2, he picked cardboard and construction adhesive.
He used 3ply cardboard and laminated 5 sheets together with the construction adhesive.
It was "surfboard" stiff, and the instructor STOPPED the destructive testing at 900lbs of rocks and two big students jumping on the rocks. Nearly 1500lbs of force with impacts!
They'd run out of rocks and room for students on it. The instructor was worried someone might get hurt if it failed.
Bryan's bridge was the ONLY one in history (12 years) that didn't break!
We had to use a chain saw to cut it up and put it in a dumpster.
So, if you really want to make a splitter out of cardboard, I know exactly how to do it...
With that kind of engineering talent and those materials, I'm surprised no one thought to add boxed rockers
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)