Printable Version of Topic

Posted by: Brew Dec 26 2006, 05:29 PM

A buddy of mine gave me a sporty little steering wheel, basically a http://www.pelicanparts.com/catalog/shopcart/MISC/POR_MISC_mowhel_pg3.htm knock off, EXCEPT it only has 5 retaining screws, not 6.

What adapter do I need?

Posted by: Travis Neff Dec 26 2006, 05:34 PM

Definatley not Momo 6 bolt, Not fittipalidi (personal wheels) 6 bolt, Sparco 6 bolt.

You might be able to use a Momo hub and drill and tap your new holes.

Posted by: Headrage Dec 26 2006, 05:41 PM

Grant wheels have the 5 hole pattern as I remember. I think the adapter is NLA from them but you might find a used one on ebay or post a wtb ad in the classifieds.

Posted by: TINCAN914 Dec 26 2006, 06:26 PM

John,

I have a Grant set-up, 5 hole screw mount, not sure if it will work, come by take a look if it fits it's yours...

Posted by: Brew Dec 26 2006, 06:40 PM

Thanks Brian! I'll call you manana.

Posted by: Headrage Dec 26 2006, 06:49 PM

QUOTE(TINCAN914 @ Dec 26 2006, 04:26 PM)

John,

I have a Grant set-up, 5 hole screw mount, not sure if it will work, come by take a look if it fits it's yours...

QUOTE(Brew @ Dec 26 2006, 04:40 PM)

Posted by: TINCAN914 Dec 26 2006, 06:52 PM

QUOTE(Headrage @ Dec 26 2006, 05:49 PM)

QUOTE(TINCAN914 @ Dec 26 2006, 04:26 PM)

John,

I have a Grant set-up, 5 hole screw mount, not sure if it will work, come by take a look if it fits it's yours...

QUOTE(Brew @ Dec 26 2006, 04:40 PM)

Thanks Brian! I'll call you manana.

See, that's what this place is all about!!!

Posted by: Aaron Cox Dec 26 2006, 09:23 PM

if brians doesnt pan out.. you can usually drill and tap a momo 6 hole for a grant 5 hole..... (assuming bolt circle is close)

renegade also makes a 5 hole adapter

Posted by: WRX914 Dec 27 2006, 02:12 PM

QUOTE(Aaron Cox @ Dec 26 2006, 07:23 PM)