I am working on a tach with a boost gauge in it for a customer with a turbo V8 car. This might be useful to the subie crowd as well. What tachs are you guys using? I know the subies are COP ignition, are you guys using a tach adapter or can you come off the ECU?
Yes, i searched
Thanks
Mark
Attached image(s)
I don't have an answer, but it sure as hell looks great!
Autometer tach is what I used. No adapter needed. There's a wire coming out of the ECU with the signal. I'm pretty sure its a 5 volt square wave signal.
-Tony
I got my guage converted by NHS... But, if you are doing gauges, what would a Temp/Oil Pressure/Fuel Guage conversion cost if I sent you a core of the stock Pressure and Temp guage that needs a refreshed face?
I only do the quads.and tachs
Check out my website for more info.
I am hoping te tach with boost gauge will be below $200
http://rides.webshots.com/photo/2956055370057582025gVqihN
http://rides.webshots.com/photo/2398688420057582025ZDbXpi
This guy does the
triple gauge sets in the same manner I do mine
http://www.914world.com/bbs2/index.php?showtopic=58970
Mark
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)