Printable Version of Topic

Posted by: jcambo7 May 25 2009, 12:15 AM

So I have seem to lost the bolts for my momo steering wheel. I am hoping and wondering if anyone here would happen to know the exact size bolts I need?
Thanks
James

Posted by: lotus_65 May 26 2009, 09:10 PM

I got bolts from http://www.sierramadrecollection.com/store/cart.php?m=product_grid&c=43 but i don't see them online.

Or maybe contact http://www.914world.com/bbs2/index.php?showtopic=85152&hl=offset

thefleur

Posted by: jcambo7 May 27 2009, 02:10 AM

Thanks

Posted by: charliew May 27 2009, 09:45 AM

Try to get stainless steel and they will never get rusty and ugly. Be careful some dino wheels use the same pattern but use larger diameter screws. I think all six hole momo's are the same size. 5x0.8x about 25mm but shorter will work My momo's use countersunk screws. I have a fastenal store locally and they ordered me some in ss for .65 each. I got 18 shipped for 4.00. I tried but couldn't find the correct size online but you could call them or email them.

http://www.fastenal.com/web/home.ex

Posted by: JWest May 27 2009, 10:57 AM

M5x0.8.

The length depends on your wheel, there are just plain wheels, and then there are those with a finishing ring that the bolts pass through, and those rings can be of different thickness.

Just take the wheel to ACE hardware and get some M5 bolts of the correct length.

Posted by: jcambo7 May 27 2009, 11:23 AM

QUOTE(JWest @ May 27 2009, 11:57 AM)