Been trying to sell this car to a motivated younger, healthier 914 addict.. I am selling my 72 Buick powered 914. Its registered in Texas and I have a Dr Evil new trans, Rennshifter and West shift kit to go with it. Its outside Houston Texas and right now am asking $ 7.5k for it . I would sell the car without the trans, shifter and west shift kit if asked but it would be cheaper and more cost effective for you to buy it all. I need the space in the garage badly, my SRT8 Challenger is sitting under the patio and my garage is in terrible disorder.
The car has:
BODY
-Rayco FRP front fenders
-Mitcom 916 rear quarter panels
-P.B. Tweeks FRP flared rocker panels
ENGINE/DRIVETRAIN
-1970 Rover/Buick all aluminum 215-V8
-STD bore, 10.5-1 (stock) comp ratio
-Cyl heads-ported exhaust ports, 3 angle valve grind with hi-retainers-shaft rocker stands shortened .060"-pushrods shortened .125" for geometry correction.
-Camshaft-M-488 custom ground by Shadbolt engineering(Vancouver B.C.) C/W hydraulic lifters
-Spheroidal graphite iron crankshaft, 5 main journal center, thrust mains, .010" under - rods ground .001"
-Hi volume oil pump, Buick v8 filter housing
-Facet electric fuel pump-GM canister filter
-Offenhauser alum intake
-500cfm Carter carb C/W electric choke
-Buick distributer with Unilite conversion
-Kennedy engineered product #1000 Rover to Porsche adapter
-KEP 2400# max pressure plate
-KEP throwout bearing
-V.W. 200mm clutch disc
-Custon h.d. radiator w/ twin Spals
-Toyota Corolla heater
ELECTRICAL
-Hella H-4 Q.I. headlites
-Eurolens rear tail lites
-Tach converted to 8cyl
-Mechanical oil pressure and water temp
-Electrical oil temp and cyl head temp
-Alpine CD with JBL audio speakers
-Electric windows
-Keyless entry
SUSPENSION
-H AT H Carrera 19mm adj front sway bar
-Addco 16mm rear sway bar
-140# rear springs (100 stock)
-Stock front torsion bar
-Koni adj front and Koni H.D. rear shock absorbers
-BMW 320i front brake conversion
-Stock Porsche rear calipers
-All four calipers have stainless steel liners and completely rebuilt.
-Adj proporsioning valve
-19mm 911 master cylinder
-All rotors have been crossdrilled
-All flex lines are braided stainless steel
-Pagio performance brake pads, all four wheels
-Carrol Shelby Mini-Europa wheels 7/15 front 8.5/15 rear
-Custom roll bar with rear chassis supports
Lots of extra's, like new bumper top on rear, GT Engine cover, spare front fenders, etc... not perfect but a nice looker and drives well.
email me for any additional info but give me some time as I am working 2 jobs right now and my health is starting to suck...
Attached thumbnail(s)
Attached image(s)
[
Neat car! I just talked to Brad Mayeur today about His impressions of v-8 cars. I've been afraid to take the plunge, but I was thinking an aluminum engine would be the only way to go. Your price doesn't sound out of line, but it sounds a little out of My budget. Good luck!
That figures... I go to the sandbox and THEN people sell V8's in my price range... DOH!
Actually have been driving the car and enjoyed the hell out of it so it may stay with me a while longer if no one comes up with an offer...even bought new mirrors and some other things for it...
Michael
Hi Michael,
I'm nearing the mid-point of my rover-914 build. I just wanted to ask about your water pump and distributor. What did you use and how did it fit?
Thanks,
Bob
What, finally getting a chance to drive for several months with all this amazing weather well into December changing your mind?
Do you have some real pictures of the car?
Oh well...I was hoping to find someone who was running the megasquirt2 electronic ignition and injection 'cuz I need some advise in those areas. Thanks and good luck!
Bob
You have 3 small pictures here in the ad and no link to others (that I can see). There are 2 pics of the engine and one picture of the back of the car. No interior shots at all. You can't even tell if the front is flared. It looks like it could be, reading from the text indicate it probably isn't, but it's almost impossible to tell by the pics that are available.
It looks fantastic but there aren't enough pics to really tell. Pictures sell cars.
So it's only flared in the rear? Can you take some good shots of the exterior if thats the case? I've been looking for pictures of a 914 that only had flares in the rear!
bump for interest!
https://www.youtube.com/watch?v=RREl0p0J1g4
ok, that helps...
well..car is going to Ebay soon, make me an offer, I will sell it for less without the Dr Evil trans, Renn shifter, and JWEST shift kit and other extras like GT lid, extra fenders, etc..
I need the room to finish my 1959 chevy truck!!!
that LS1 engine I have in the crate in the garage is screaming to get into that beast!!!
make me a reasonable offer...its going to Ebay this week.
[quote name='michaelt55' date='Aug 14 2011, 08:27 AM' post='1524425']
make me a reasonable offer...its going to Ebay this week.
ok...its on Ebay item #150658665434
[quote name='michaelt55' date='Sep 4 2011, 12:10 PM' post='1534429']
[quote name='michaelt55' date='Aug 14 2011, 08:27 AM' post='1524425']
make me a reasonable offer...its going to Ebay this week.
ok...its on Ebay item #150658665434
[/quote]
well I am surprised...no bids, several calls and offers off the cuff..but nothing solid...after 2 listings...
looks like its staying with me..
It's a nice car. I'm not a buyer, just an admirer that lives at 610/290 area. I'd love to come by and see your creation sometime!
Either way, if it's meant to sell, it will. Good luck!
Pete
[quote name='michaelt55' date='Oct 5 2011, 08:18 PM' post='1549975']
[quote name='AgPete139' post='1545342' date='Sep 27 2011, 04:01 PM']
It's a nice car. I'm not a buyer, just an admirer that lives at 610/290 area. I'd love to come by and see your creation sometime!
Either way, if it's meant to sell, it will. Good luck!
Pete
[/quote]
thanks...its just after my accident its really hard to get into a car this low but guess I need to put the extra parts in it and drive the wheels off of it...but thats taking money from my 59 chevy truck rebuild...
still for sale guys..
ok, its been a busy month, paid taxes, married off daughter , getting started on new job, etc...
if I havent replied to people asking about the car, please try again..I know its a pain but now I have time to answer questions and post more pix if needed!!
Anyone interested???
super nice
Price drop. $9000 with extra parts or
$7500 without. It's not getting any lower so make a move!
Gotta move it to make room!
What a great price for V8 conversion.
Please give me a call. PM sent with my phone number.
Is car still for sale ? Please give me a call 609 680 8800 Thanks Ed
Is it still for sale? call me if it is 707 293 7575
[quote name='hbgsteve' date='Mar 7 2012, 06:36 PM' post='1641122']
Is it still for sale? call me if it is 707 293 7575
left you a message
ok, last 2 people who expressed interest have been contacted. I need to sell the car as its really taking up space in the garage and I cant drive it comfortably any more due to my medical condition. Come on..lets talk turkey, be reasonable. Hell I will even take trade on some work or parts on my 1959 Chevy Apache!
Well...still looking for a new owner...lets talk money, I will sell the whole kit and kaboodle for $7500. Longer you guys wait , the less I will put into the car, I am about ready to place it in storage and wait. Email me with offers but dont be ridiculous or insulting please.
seems either no one cares or I am going about this wrong...someone make an offer?
i'm surprised nobody has scooped this yet. i have way more than the asking into my long stalled project and it's nowhere near complete...
Hello, I am interested in your car. I am new to this site but have always thought 914's are fantastic cars. I am interested in a nice driver quality car that is simple and fun to drive. I appreciate your time, thank you, Todd. (609) 805-5964
ok I have again talked to one gentleman in depth, still looking for a buyer...
Still waiting on Todd to reply...
ok, I now have 3 people who are wanting to purchase the porsche, I have given Gandolf the first offer, so if he does not reply to me bt tomorrow, I will offer the car to one other gentleman and Scoop.
ok, car sold, just left on the transport. Good luck to the new owner. Thanks ever so much to Jaime and everyone else..I may lurk but doubt I will own another due to back issues. Thanks ever so much to all the members.
Glad to hear it Mike! Thanks for all the advice when I was setting mine up
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)