Rust Repair, 1975 2.0 |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Rust Repair, 1975 2.0 |
bjheil |
Sep 1 2019, 07:41 AM
Post
#1
|
Newbie Group: Members Posts: 7 Joined: 20-August 18 From: Baltimore, MD Member No.: 22,409 Region Association: MidAtlantic Region |
I have some rust repairs to do on my 1975 2.0. Where is the best place to take it in the mid-atlantic?
|
BeatNavy |
Sep 1 2019, 09:32 AM
Post
#2
|
Certified Professional Scapegoat Group: Members Posts: 2,933 Joined: 26-February 14 From: Easton, MD Member No.: 17,042 Region Association: MidAtlantic Region |
How extensive are the repairs?
I just got a tour of CPR East in Easton, MD last week (after meaning to do it for years). They have very nice shop with full metal fab, paint, and other services. Seem like good guys, but I don't imagine they are cheap. They also (of course) focus mostly on 911's, 356's, and 912's. Mark (mepstein) is also very familiar with a shop in Eastern PA (I think) that knows all Porsches. He might have recommendations. I don't think Chris at Tangerine is currently doing repairs. The options among those who REALLY know these cars are limited. |
bjheil |
Sep 1 2019, 10:09 AM
Post
#3
|
Newbie Group: Members Posts: 7 Joined: 20-August 18 From: Baltimore, MD Member No.: 22,409 Region Association: MidAtlantic Region |
I don't think they are major. Probably on the minor side.
|
Superhawk996 |
Sep 1 2019, 10:33 AM
Post
#4
|
914 Guru Group: Members Posts: 6,469 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch |
I don't think they are major. Probably on the minor side. (IMG:style_emoticons/default/welcome.png) (IMG:style_emoticons/default/thisthreadisworthlesswithoutpics.gif) 914's rarely only need minor rust repair. Post pictures and those on this forum will be better able to assist you with the decision of whether or not it is indeed minor, and also as is already the case, to help you find a shop capable of the work. Very few shops are really capable of doing the work required and doing it well. Even fewer that can do it affordably. Responses will probably be slow this weekend due to holiday weekend and other diversions. |
DickSteinkamp |
Sep 1 2019, 10:46 AM
Post
#5
|
Senior Member Group: Members Posts: 500 Joined: 27-February 17 From: Bellingham, WA Member No.: 20,876 Region Association: None |
Post pictures and those on this forum will be better able to assist you with the decision of whether or not it is indeed minor, X2. The most important pictures are going to be those of the "hell hole" (the "trap" under and forward of the battery tray) and with the rocker covers removed of the longs. Any other pictures where rust is apparent would also be good. All best done with the car on a lift. |
Tdskip |
Sep 1 2019, 12:40 PM
Post
#6
|
Advanced Member Group: Members Posts: 3,697 Joined: 1-December 17 From: soCal Member No.: 21,666 Region Association: None |
Welcome!
As the other guys has said, post pictures of the areas before making an appointment. |
bjheil |
Sep 3 2019, 08:10 PM
Post
#7
|
Newbie Group: Members Posts: 7 Joined: 20-August 18 From: Baltimore, MD Member No.: 22,409 Region Association: MidAtlantic Region |
Take a look.
Attached thumbnail(s) |
DickSteinkamp |
Sep 3 2019, 08:42 PM
Post
#8
|
Senior Member Group: Members Posts: 500 Joined: 27-February 17 From: Bellingham, WA Member No.: 20,876 Region Association: None |
Ouch!
|
rjames |
Sep 3 2019, 10:07 PM
Post
#9
|
I'm made of metal Group: Members Posts: 4,111 Joined: 24-July 05 From: Shoreline, WA Member No.: 4,467 Region Association: Pacific Northwest |
Definitely not on the minor side. Looks potentially terminal. More photos will give a better picture, but probably safe to say it would be cheaper to find a better car, especially true if you’ll be paying son else to do the work.
|
Jonathan Livesay |
Sep 3 2019, 10:22 PM
Post
#10
|
Senior Member Group: Members Posts: 744 Joined: 13-March 10 From: La Canada CA Member No.: 11,461 Region Association: None |
Definitely not on the minor side. Looks potentially terminal. More photos will give a better picture, but probably safe to say it would be cheaper to find a better car, especially true if you’ll be paying son else to do the work. (IMG:style_emoticons/default/agree.gif) For that much rust to get to the places it has in the first and third pictures there is a lot more that you will find once you start looking. First picture most likely means rust in hell hole, bottom of firewall, and suspension console, if not rear of passenger floor as well. Clearly it's new longitudinals time. |
Specracer |
Sep 4 2019, 05:24 AM
Post
#11
|
Member Group: Members Posts: 100 Joined: 27-March 17 From: SE Mass Member No.: 20,970 Region Association: None |
The sad reality of these cars, is that they rust from the inside out. So by the time you can see it, it's bad.
|
IronHillRestorations |
Sep 4 2019, 06:55 AM
Post
#12
|
I. I. R. C. Group: Members Posts: 6,759 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None |
You could have more expense in repairing rust damage than the car is worth, a lot more.
It looks pretty bad, but that doesn't mean it couldn't be saved, just at what cost. It could be scabbed over, and bondoed up to get a few more years out of it, but it's not a good prognosis. |
bbrock |
Sep 4 2019, 07:38 AM
Post
#13
|
914 Guru Group: Members Posts: 5,269 Joined: 17-February 17 From: Montana Member No.: 20,845 Region Association: Rocky Mountains |
I concur with what has been said here. Your car looks like a great candidate for a DIY project for someone who can, or wants to learn, welding and metal fabrication like I did. Even more extensive rust damage than this can be repaired fairly inexpensively, but to pay someone for the work will cost more than buying a really nice, rust free car. Sorry for the bad news. (IMG:style_emoticons/default/sad.gif)
|
jdamiano |
Sep 4 2019, 08:27 AM
Post
#14
|
Member Group: Members Posts: 335 Joined: 18-March 18 From: Jacksonville Member No.: 21,981 Region Association: South East States |
A 75 2.0 has never been worth more so depending on how much you already have in it you might be okay from a value standpoint. If you decide to fix the rust just make sure it’s done well. Crappy repairs will not hold up and only decrease the cars value. Post a picture of under the battery for more input from the group.
|
DickSteinkamp |
Sep 4 2019, 09:07 AM
Post
#15
|
Senior Member Group: Members Posts: 500 Joined: 27-February 17 From: Bellingham, WA Member No.: 20,876 Region Association: None |
(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-20876-1567609649.1.jpg)
This picture tells me that the rust is pretty much terminal. Anything can be fixed, but IMHO it would have to end up being worth a lot more money than a 914 brings to justify the money and time. It's tough to find a 50 year old unibody car with minimal rust...especially in the eastern part of the US. Keep looking. Consider one from the dryer parts of the US. Shipping is a lot cheaper than rust repair. |
rjames |
Sep 4 2019, 10:21 AM
Post
#16
|
I'm made of metal Group: Members Posts: 4,111 Joined: 24-July 05 From: Shoreline, WA Member No.: 4,467 Region Association: Pacific Northwest |
Part it out and you will probably make a good chunk of your $ back.
|
IronHillRestorations |
Sep 4 2019, 11:11 AM
Post
#17
|
I. I. R. C. Group: Members Posts: 6,759 Joined: 18-March 03 From: West TN Member No.: 439 Region Association: None |
Unless the suspension components are equally as corroded, you may consider finding a donor chassis and moving all the good parts from your rusty car to the new chassis
|
bjheil |
Sep 4 2019, 06:01 PM
Post
#18
|
Newbie Group: Members Posts: 7 Joined: 20-August 18 From: Baltimore, MD Member No.: 22,409 Region Association: MidAtlantic Region |
Battery, passenger rear floor, ans driver's longitudinal.
Attached thumbnail(s) |
Superhawk996 |
Sep 4 2019, 06:33 PM
Post
#19
|
914 Guru Group: Members Posts: 6,469 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch |
(IMG:style_emoticons/default/agree.gif) with all the above.
There are multiple threads on this site that have started with worse. Brent's Thread: http://www.914world.com/bbs2/index.php?showtopic=307290 Jeff Hails Thread: http://www.914world.com/bbs2/index.php?showtopic=76791 My build is in signature - still work in progress. Others have tread the path before. It can be done. It is not easy. |
Lo-Fi Version | Time is now: 27th September 2024 - 06:53 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |