1974 stock spring rate ?, 1974 stock spring rate ???? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
1974 stock spring rate ?, 1974 stock spring rate ???? |
lweb19 |
Nov 24 2019, 08:21 PM
Post
#1
|
Newbie Group: Members Posts: 2 Joined: 14-November 19 From: Ann Arbor Member No.: 23,642 Region Association: None |
Hey my car is too stiff:
Yellow Konis all around. 21 mm front bars 150 lbs rear that are about 10-inches long Is stock? 19 mm front 100 lb rear? If so I think that'll be a good thing to try. What is the stock rear spring length? And anyone have a stock spring set they'd like to sell?? Thanks! |
mepstein |
Nov 24 2019, 08:31 PM
Post
#2
|
914-6 GT in waiting Group: Members Posts: 19,518 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region |
Stock front torsion bar is 17.9 on a four and 18.8 on a six.
Stock rear springs were around 50 lbs and about 60lbs on a six. It's easy to get to harsh, especially on the front. A mid 80's 911 Carrera only has 19mm front torsion bars and it's a 2700 lb car. The formula for calculating spring rate is: k=d^4G where k=spring rate, d=diameter, G=modulus of elasticity (constant for steel)so ignoring the constant: % increase in stiffness = ( (d2^4)- (d1^4) ) / (d1^4) * 100 where d2 is new diameter and d1 is original diameter Stock Front = 18.8 increase to 21 mm = 55.7 % increase in spring rate. Going from 17.9 to 21mm = 87.5% increase in spring rate (IMG:style_emoticons/default/welcome.png) |
lweb19 |
Nov 25 2019, 05:30 AM
Post
#3
|
Newbie Group: Members Posts: 2 Joined: 14-November 19 From: Ann Arbor Member No.: 23,642 Region Association: None |
Thanks very much. Super helpful. I found a set of 17.9 front bars that I will try.
Do you happen to know the length of a stock rear spring? Stock front torsion bar is 17.9 on a four and 18.8 on a six. Stock rear springs were around 50 lbs and about 60lbs on a six. It's easy to get to harsh, especially on the front. A mid 80's 911 Carrera only has 19mm front torsion bars and it's a 2700 lb car. The formula for calculating spring rate is: k=d^4G where k=spring rate, d=diameter, G=modulus of elasticity (constant for steel)so ignoring the constant: % increase in stiffness = ( (d2^4)- (d1^4) ) / (d1^4) * 100 where d2 is new diameter and d1 is original diameter Stock Front = 18.8 increase to 21 mm = 55.7 % increase in spring rate. Going from 17.9 to 21mm = 87.5% increase in spring rate (IMG:style_emoticons/default/welcome.png) |
Racer |
Nov 25 2019, 08:06 AM
Post
#4
|
Senior Member Group: Members Posts: 787 Joined: 25-August 03 From: Northern Virginia Member No.: 1,073 Region Association: MidAtlantic Region |
I always thought rear spring rate was closer to 70# on a 4 and 90# on a /6...
|
bbrock |
Nov 25 2019, 08:33 AM
Post
#5
|
914 Guru Group: Members Posts: 5,269 Joined: 17-February 17 From: Montana Member No.: 20,845 Region Association: Rocky Mountains |
|
Racer |
Nov 25 2019, 10:14 AM
Post
#6
|
Senior Member Group: Members Posts: 787 Joined: 25-August 03 From: Northern Virginia Member No.: 1,073 Region Association: MidAtlantic Region |
I always thought rear spring rate was closer to 70# on a 4 and 90# on a /6... The factory service manual lists spring rates that are in line with what Mark posted once you do the math (50ish for the four). math? I own a 914.. I don't do math (IMG:style_emoticons/default/wink.gif) Found this: http://www.914world.com/bbs2/index.php?showtopic=95741 (scroll to post #14) and it had this: https://members.rennlist.com/chuxter/914CoilSprings.htm i can't vouch for validity, just my ability to google stuff.. |
Mikey914 |
Nov 25 2019, 11:02 AM
Post
#7
|
The rubber man Group: Members Posts: 12,711 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
In testing for production of our springs we found the spring rates were in th3 64 -68# range for the 4's We optimized the the spring at 100# as the geometry and loading suggested that the 100 was the best, We also made the 140/160 progressive springs for a more sporty ride.
Sorry I stand corrected it has been awhile we were in the 54-58 range. They were old springs but that's about where they were for most tested (10 sets if I recall correctly). |
Lo-Fi Version | Time is now: 27th September 2024 - 05:40 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |