Polishing Window Trim |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Polishing Window Trim |
yeahmag |
Mar 31 2010, 12:36 PM
Post
#1
|
Advanced Member Group: Members Posts: 2,435 Joined: 18-April 05 From: Pasadena, CA Member No.: 3,946 Region Association: Southern California |
I got some used AL windshield trim and need to polish it up. The anodizing is badly scratched and my local plater will want about $80 to fix it. I've read conflicting things about how to strip the anodizing and how to polish it there after.
Anybody have any real world advise? -Aaron |
r_towle |
Mar 31 2010, 06:02 PM
Post
#2
|
Custom Member Group: Members Posts: 24,624 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Easy off takes off anodizing.
From there you probably want to sand it from 600 or higher up to 1500, then use progressive buffing compound on a wheel buffer. Rich |
Rand |
Mar 31 2010, 06:08 PM
Post
#3
|
Cross Member Group: Members Posts: 7,409 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None |
You polish something on a 914? Eww. Remove, eliminate, scuff... anything but polish! (IMG:style_emoticons/default/happy11.gif)
|
Tom_T |
Mar 31 2010, 06:25 PM
Post
#4
|
TMI.... Group: Members Posts: 8,320 Joined: 19-March 09 From: Orange, CA Member No.: 10,181 Region Association: Southern California |
Easy off takes off anodizing. From there you probably want to sand it from 600 or higher up to 1500, then use progressive buffing compound on a wheel buffer. Rich IIRC there's a tech article on this very subject on the Pelican site, & that they start with 1000 or 1500, then go to 2000, then chrome polish. The grit takes off most of the anodized layer (pretty thin effect layer), as you're smoothing out the scratches. Go look on the Bird site for the step by step & pix! Also there was one topic posted awhile back under O&H on how some of the CW's get theirs all purdy! They also have a wheel polishing tech article at the bird site. |
Pat Garvey |
Mar 31 2010, 06:56 PM
Post
#5
|
Do I or don't I...........? Group: Members Posts: 5,899 Joined: 24-March 06 From: SE PA, near Philly Member No.: 5,765 Region Association: North East States |
I got some used AL windshield trim and need to polish it up. The anodizing is badly scratched and my local plater will want about $80 to fix it. I've read conflicting things about how to strip the anodizing and how to polish it there after. Anybody have any real world advise? -Aaron Do it! Let the plater do the hard work. It isn't the anodizing that's "badly scratched" -it's the aluminum below. Once the anodizing( a very fine coating) is compromised the only option is to refinish. You can polish like a bat's ass but it will be useless if it isn't re-anodzed. And, the plater should have quoted you for polishing before re-anodizing. You shouldn't need to do anything thereafter. A little ossasional wax wouldn't hurt, but never take any abrasive compounds to it. EVER! Pat |
Lo-Fi Version | Time is now: 26th September 2024 - 09:52 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |