what seam sealer to use? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
what seam sealer to use? |
shaggy |
Sep 12 2006, 06:36 PM
Post
#1
|
mechanic/welder/fabricator Group: Members Posts: 702 Joined: 26-September 05 From: Gilbert, AZ Member No.: 4,869 Region Association: None |
what seam sealer should i use??
LOCTITE 574 or whatever else? thanks -shag |
VaccaRabite |
Sep 12 2006, 08:18 PM
Post
#2
|
En Garde! Group: Admin Posts: 13,554 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region |
I got the stuff that eastwood sells, and it went on really well.
Get the Eastwood catalogue, if you are restoring a car, it is required reading. Even if it is to just give you ideas on how to fix stuff, without actually buying stuff from them. http://www.eastwoodco.com/ Zach |
Rand |
Sep 12 2006, 11:10 PM
Post
#3
|
Cross Member Group: Members Posts: 7,409 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None |
Maybe I'm in the minority, but I HATE seam sealer. In many cases it creates more rot problems than it solves. Yes, it can be done well, but I still say most of it is from the devil. I've had nightmares about removing that crap. I would much rather deal with rust removal, Ospho, <insert your favorite rust killer / preventer / yada here> and a quality rust protective paint (Por15, Hammerite, etc.). Yes, the prep and treatment is critical for a quality result, but man I'm glad to have NO seam sealer. (IMG:style_emoticons/default/smile.gif)
|
shaggy |
Sep 12 2006, 11:48 PM
Post
#4
|
mechanic/welder/fabricator Group: Members Posts: 702 Joined: 26-September 05 From: Gilbert, AZ Member No.: 4,869 Region Association: None |
oh...sorry i should have been more specific. im talking about seam sealer for a 2.0L engine...
sorry... -jim |
Rand |
Sep 12 2006, 11:50 PM
Post
#5
|
Cross Member Group: Members Posts: 7,409 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None |
Hey Jim. Sorry if I went off on a tangent. Where exactly are you wanting to use seam sealer on your 2.0 engine?
|
shaggy |
Sep 13 2006, 12:30 AM
Post
#6
|
mechanic/welder/fabricator Group: Members Posts: 702 Joined: 26-September 05 From: Gilbert, AZ Member No.: 4,869 Region Association: None |
Hey Jim. Sorry if I went off on a tangent. Where exactly are you wanting to use seam sealer on your 2.0 engine? everywhere that needs it (IMG:style_emoticons/default/biggrin.gif) case halves pushrod seals jugs cam plug main seals intake runner gaskets exuahst rings(<- not sure about that one) i think thats all... please let me know if im missing something -jim |
MoveQik |
Sep 13 2006, 12:34 AM
Post
#7
|
What size wheels can I fit? Group: Members Posts: 4,654 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
Just tell your dad to get off his lazy arse and handle it. (IMG:style_emoticons/default/biggrin.gif)
:duckandrunforcoversmilie: (IMG:style_emoticons/default/poke.gif) |
Rand |
Sep 13 2006, 12:40 AM
Post
#8
|
Cross Member Group: Members Posts: 7,409 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None |
Dude, sorry for the semantic confusion. But when I heard "seam sealer" I was thinking of the more common seam sealer used between body panels.
You are talking engine parts, which is a different matter. And now let us address a whole new series of opinions! (IMG:style_emoticons/default/laugh.gif) Ok, some of my opinions on this... Pushrod tube seals: Loctite 565 flexible sealant. Rotate the tubes and let them set. I think Jake will back this. Case halves and jugs? Not sure you need chemical junk there, but I will defer to the engine gurus on those. Intake runner gaskets? Nothing crazy needed there. I used a cheap solution: Radiator hose pieces that match the dimensions. They are nice and tight. The purists will insist on cloth-covered pieces. Exhuast rings? If you mean the copper gaskets between the heads and headers/exhuaust pipes/manifolds, then just get them from a local VW supplier. Cost is not an issue. Best of luck! |
shaggy |
Sep 13 2006, 12:41 AM
Post
#9
|
mechanic/welder/fabricator Group: Members Posts: 702 Joined: 26-September 05 From: Gilbert, AZ Member No.: 4,869 Region Association: None |
LOL (IMG:style_emoticons/default/laugh.gif)
but if he did that id never learn it... + its unwise to piss off your financier ++ he owns the car -jim |
MoveQik |
Sep 13 2006, 12:43 AM
Post
#10
|
What size wheels can I fit? Group: Members Posts: 4,654 Joined: 5-April 05 From: Scottsdale, AZ Member No.: 3,881 Region Association: Southwest Region |
LOL (IMG:style_emoticons/default/laugh.gif) but if he did that id never learn it... + its unwise to piss off your financier ++ he owns the car -jim jim - you are wise beyond your years. I look forward to meeting you soon! MW |
shaggy |
Sep 13 2006, 12:46 AM
Post
#11
|
mechanic/welder/fabricator Group: Members Posts: 702 Joined: 26-September 05 From: Gilbert, AZ Member No.: 4,869 Region Association: None |
Dude, sorry for the semantic confusion. But when I heard "seam sealer" I was thinking of the more common seam sealer used between body panels. You are talking engine parts, which is a different matter. And now let us address a whole new series of opinions! (IMG:style_emoticons/default/laugh.gif) Ok, some of my opinions on this... Pushrod tube seals: Loctite 565 flexible sealant. Rotate the tubes and let them set. I think Jake will back this. Case halves and jugs? Not sure you need chemical junk there, but I will defer to the engine gurus on those. Intake runner gaskets? Nothing crazy needed there. I used a cheap solution: Radiator hose pieces that match the dimensions. They are nice and tight. The purists will insist on cloth-covered pieces. Exhuast rings? If you mean the copper gaskets between the heads and headers/exhuaust pipes/manifolds, then just get them from a local VW supplier. Cost is not an issue. Best of luck! ok so for push tubes i need a flexible sealer huh? i heard that the 6-ers use loctite 574 for the case for the intake runners i mean where the runner meets the intake port of the head. i didnt think the exhaust needed sealer, but i had to check, over the course of buying parts for the rebuild i have accumulated 2 sets of copper exhaust gaskets. thanks for the response -jim |
Rand |
Sep 13 2006, 12:54 AM
Post
#12
|
Cross Member Group: Members Posts: 7,409 Joined: 8-February 05 From: OR Member No.: 3,573 Region Association: None |
Yes, pushrod tubes, loctite 565 flexible sealant, has Jake's approval.
Again, I don't know about the case. Looking forward to learning from this. Intake runners to me are the air tubes. If you mean the phenolic blocks, then I look forward to more input from the gurus. My take is they have paper-like gasket material on each side and do NOT need any kind of sealant. If Jake or some other guru pipes in and recommends a sealant then I will be schooled. Otherwise, just clean the surfaces and bolt it up. The copper exhaust gaskets between the heads and exhaust pipes/headers... just make sure you have only one set (sounds dumb, but many people have dealt with extras in there). No sealant needed there. Just clean and unmolested surfaces. |
Lo-Fi Version | Time is now: 27th September 2024 - 07:55 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |