Differences in front suspension? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Differences in front suspension? |
mb911 |
May 12 2016, 05:17 AM
Post
#1
|
914 Guru Group: Members Posts: 7,163 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest |
Is there a difference between front suspension on our cars someone told me the 2.0 front suspension had tabs welded to the a arms? Everything I have seen shows it all the same.
|
TheCabinetmaker |
May 12 2016, 06:01 AM
Post
#2
|
I drive my car everyday Group: Members Posts: 8,309 Joined: 8-May 03 From: Tulsa, Ok. Member No.: 666 |
I have seen the sway bar u tabs on cars without bars, regardless of engine size. I have also seen sway bars on 1.7 L cars.
|
Luke M |
May 12 2016, 06:01 AM
Post
#3
|
Senior Member Group: Members Posts: 1,389 Joined: 8-February 05 From: WNY Member No.: 3,574 Region Association: North East States |
Only thing that I'm aware of is the sway bar tabs on the a-arms.
Some 914's had them while others didn't otherwise all the same. There's a difference in 914 early vs late brake systems. Now if you're talking 914 vs 914-6/911 there's a difference in a few areas. |
mepstein |
May 12 2016, 06:42 AM
Post
#4
|
914-6 GT in waiting Group: Members Posts: 19,518 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region |
I believe all early cars had the tabs even if they didn't come with the bars. Unfortunately, you still have to drill for the - through the body mount.
|
rgalla9146 |
May 12 2016, 08:32 AM
Post
#5
|
Advanced Member Group: Members Posts: 4,624 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None |
Different torsion bar spline count on sixes.
No sway bars as original equip. on a six |
Dave_Darling |
May 12 2016, 12:43 PM
Post
#6
|
914 Idiot Group: Members Posts: 15,048 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California |
Not sure about that last point. I think that at some point you could order a Six with sway bars? But, as I said, I'm not sure about that.
--DD |
rgalla9146 |
May 12 2016, 03:12 PM
Post
#7
|
Advanced Member Group: Members Posts: 4,624 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None |
Not sure about that last point. I think that at some point you could order a Six with sway bars? But, as I said, I'm not sure about that. --DD It's purely an observation on my part. I've never seen an option list for a 1970 4 cyl. or 6 cyl. but can't say I've ever looked for one either. Anyone ? Did a 1970 sales brochure list options ? |
Jeffs9146 |
May 12 2016, 04:31 PM
Post
#8
|
Ski Bum Group: Members Posts: 4,062 Joined: 10-January 03 From: Discovery Bay, Ca Member No.: 128 |
|
SirAndy |
May 12 2016, 04:40 PM
Post
#9
|
Resident German Group: Admin Posts: 41,815 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
Unfortunately, you still have to drill for the - through the body mount. Or use the 911 style under-body swaybar. I ran one of them for a while and it worked just fine. You need the matching round tabs for the a-arms but other than that, no cutting needed. (IMG:style_emoticons/default/shades.gif) |
914Sixer |
May 12 2016, 05:19 PM
Post
#10
|
914 Guru Group: Members Posts: 8,989 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region |
Six's never had factory optioned sway bars. Factory PREPARED sixes for racing did. All cars 1.7, 1.8 and 2.0 had U tab control arms up to 1975. They did some cost cutting by leaving them off. SOME 76 cars DID have U tabs on control arms when they started running out of parts at the end of production.
|
JFJ914 |
May 13 2016, 10:03 AM
Post
#11
|
Senior Member Group: Benefactors Posts: 813 Joined: 13-June 03 From: Alpharetta, GA Member No.: 814 Region Association: South East States |
Six's never had factory optioned sway bars. Factory PREPARED sixes for racing did. All cars 1.7, 1.8 and 2.0 had U tab control arms up to 1975. They did some cost cutting by leaving them off. SOME 76 cars DID have U tabs on control arms when they started running out of parts at the end of production. My factory 1974 1.8 arms do not have the tabs. |
914Sixer |
May 13 2016, 11:03 AM
Post
#12
|
914 Guru Group: Members Posts: 8,989 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region |
Is your 74 a late in the year model? Like May, June, July?
|
Lo-Fi Version | Time is now: 27th September 2024 - 01:33 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |