914/6 bulk head mounts opinions please |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914/6 bulk head mounts opinions please |
LarryR |
Oct 20 2008, 10:06 PM
Post
#1
|
Senior Member Group: Members Posts: 929 Joined: 15-March 07 From: E. Bay Area, N. California Member No.: 7,604 |
I have been looking at different bulk head mounts and I am leaning towards the patrick motorsports mounts. I figured I might as well throw the question out there to see what others have used.
Right now the reasons I am leaning towards the PM mount is because it has the mounts further apart, seems to have a more race oriented poly mount, and a good quality construction. The negative is that it is about 200 more than the other mount I am looking at but I figure worth it for a fairly mission critical part. Here is the PM mount: Here is the other one I am looking at: All feedback both positive and negative are appreciated. Larry |
LarryR |
Oct 20 2008, 11:00 PM
Post
#2
|
Senior Member Group: Members Posts: 929 Joined: 15-March 07 From: E. Bay Area, N. California Member No.: 7,604 |
Thanks for all of the responses. It looks like the Richard Johnson mount is the way to go. Glad I posted here first. Thanks, Larry
|
Bucci |
Oct 20 2008, 11:10 PM
Post
#3
|
Bucci Group: Members Posts: 106 Joined: 11-August 08 From: Carlsbad,Ca Member No.: 9,407 Region Association: Southern California |
Thanks for all of the responses. It looks like the Richard Johnson mount is the way to go. Glad I posted here first. Thanks, Larry Larry, there is one more mount that I know of. It is built by Randy Beck and is a bolt-in to a four cylinder car with stock motor mounts. No... Cutting, drilling, welding etc.... Please respond and I will send out a picture I have one of these bars for my six conversion and has worked well for over 12 years! Best Marc- phone number 619-726-9012 |
PeeGreen 914 |
Oct 21 2008, 01:20 AM
Post
#4
|
Just when you think you're done...wait, there is more..lol Group: Members Posts: 10,219 Joined: 21-September 06 From: Seattle, WA... actually Everett Member No.: 6,884 Region Association: Pacific Northwest |
Thanks for all of the responses. It looks like the Richard Johnson mount is the way to go. Glad I posted here first. Thanks, Larry Larry, there is one more mount that I know of. It is built by Randy Beck and is a bolt-in to a four cylinder car with stock motor mounts. No... Cutting, drilling, welding etc.... Please respond and I will send out a picture I have one of these bars for my six conversion and has worked well for over 12 years! Best Marc- phone number 619-726-9012 I had this mount on my car before I did the Patrick mount and I wouldn't sugest doing it. It is just the cheap way of getting a six in. If you are doing any kind of racing it is unsafe and very heavy. |
Lo-Fi Version | Time is now: 27th September 2024 - 12:40 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |