Raby 2056 kit, Price increse??? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Raby 2056 kit, Price increse??? |
mike_the_man |
Apr 5 2010, 11:23 AM
Post
#1
|
I like stuff! Group: Members Posts: 1,338 Joined: 11-June 03 From: Regina, Saskatchewan, Canada Member No.: 809 |
Hi all,
I've been needing an engine rebuild for quite awhile now. I finally pulled out the tired old 2.0L and I'm in the process of putting in a 1.8L to drive while I do a rebuild. My plan (dream?) the entire time has been to buy a Raby 2056 kit and do the build myself. I'm pretty sure the last time I looked, the kits were around $3600. At that price, I'd say it was a no brainer. I had another look at the Type4Store site yesterday, and I see the kits are now $6000. I know Jake builds great stuff, and I'm sure the price is still worth it, but it's a little harder to justify the cost at the price point. Does anyone have any insight as to why the cost has jumped? Is Jake still active on here (haven't seen him post much lately)? Any suggestions on alternatives? What should I do? I was hoping to get some more power out of the 2.0L and I know that's not cheap. Thanks, |
Mark Henry |
Apr 5 2010, 11:48 AM
Post
#2
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
Shameless plug but... Mike if you want to start collecting I have a 80mm crank and rods from Raby here in Canada.
I want full pop but I'll save you the ultra expensive FedEx shipping he uses and border taxes. |
mike_the_man |
Apr 5 2010, 02:09 PM
Post
#3
|
I like stuff! Group: Members Posts: 1,338 Joined: 11-June 03 From: Regina, Saskatchewan, Canada Member No.: 809 |
Shameless plug but... Mike if you want to start collecting I have a 80mm crank and rods from Raby here in Canada. I want full pop but I'll save you the ultra expensive FedEx shipping he uses and border taxes. Mark, are you still working with Jake on engine builds? I believe at one time you were the Canadian distributor? I can only imagine how much shipping a crate of engine parts across the border would cost. Cheers, Mike |
Tom_T |
Apr 5 2010, 02:19 PM
Post
#4
|
TMI.... Group: Members Posts: 8,320 Joined: 19-March 09 From: Orange, CA Member No.: 10,181 Region Association: Southern California |
Shameless plug but... Mike if you want to start collecting I have a 80mm crank and rods from Raby here in Canada. I want full pop but I'll save you the ultra expensive FedEx shipping he uses and border taxes. Mark, are you still working with Jake on engine builds? I believe at one time you were the Canadian distributor? I can only imagine how much shipping a crate of engine parts across the border would cost. Cheers, Mike Maybe drive it across the border & ship it from the closest US shipper, then do reverse for return delivery? |
rebelmdot |
Apr 5 2010, 02:56 PM
Post
#5
|
914ini Group: Members Posts: 224 Joined: 25-January 08 From: Tennessee Member No.: 8,625 Region Association: South East States |
Unfortunately that is smuggling, unless cleared through Customs at the Border. Please don't do that.
Shameless plug but... Mike if you want to start collecting I have a 80mm crank and rods from Raby here in Canada. I want full pop but I'll save you the ultra expensive FedEx shipping he uses and border taxes. Mark, are you still working with Jake on engine builds? I believe at one time you were the Canadian distributor? I can only imagine how much shipping a crate of engine parts across the border would cost. Cheers, Mike Maybe drive it across the border & ship it from the closest US shipper, then do reverse for return delivery? |
mike_the_man |
Apr 5 2010, 03:00 PM
Post
#6
|
I like stuff! Group: Members Posts: 1,338 Joined: 11-June 03 From: Regina, Saskatchewan, Canada Member No.: 809 |
I don't think he meant to smuggle it across the border, just to have it shipped close to the border, then drive it across, claiming it and paying duty etc. It's usually the brokerage and shipping fees that really kill you when shipping into Canada.
Unfortunately that is smuggling, unless cleared through Customs at the Border. Please don't do that. Shameless plug but... Mike if you want to start collecting I have a 80mm crank and rods from Raby here in Canada. I want full pop but I'll save you the ultra expensive FedEx shipping he uses and border taxes. Mark, are you still working with Jake on engine builds? I believe at one time you were the Canadian distributor? I can only imagine how much shipping a crate of engine parts across the border would cost. Cheers, Mike Maybe drive it across the border & ship it from the closest US shipper, then do reverse for return delivery? |
rebelmdot |
Apr 5 2010, 03:16 PM
Post
#7
|
914ini Group: Members Posts: 224 Joined: 25-January 08 From: Tennessee Member No.: 8,625 Region Association: South East States |
I wasn't suggesting that he was, a lot of people are not informed about international moving of cargo and did not want anyone to get in trouble. No worries, good luck with the engine.
I don't think he meant to smuggle it across the border, just to have it shipped close to the border, then drive it across, claiming it and paying duty etc. It's usually the brokerage and shipping fees that really kill you when shipping into Canada. Unfortunately that is smuggling, unless cleared through Customs at the Border. Please don't do that. Shameless plug but... Mike if you want to start collecting I have a 80mm crank and rods from Raby here in Canada. I want full pop but I'll save you the ultra expensive FedEx shipping he uses and border taxes. Mark, are you still working with Jake on engine builds? I believe at one time you were the Canadian distributor? I can only imagine how much shipping a crate of engine parts across the border would cost. Cheers, Mike Maybe drive it across the border & ship it from the closest US shipper, then do reverse for return delivery? |
Lo-Fi Version | Time is now: 27th September 2024 - 04:34 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |