We're Painted, Proof There really is a Car! |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
We're Painted, Proof There really is a Car! |
andys |
Jul 18 2011, 03:15 PM
Post
#1
|
Advanced Member Group: Members Posts: 2,165 Joined: 21-May 03 From: Valencia, CA Member No.: 721 Region Association: None |
Painted the car finally - I took two days to do the sealer, base, and clear (It took me nearly 5 hours just to mask and skirt, as I put the car on jack stands). Color is GT Silber. Used (very) $$$ PPG.
Scottyb, you were right about the amount of base. I used just under than 2 quarts for three coats (the cabin, engine bay, and inside both trunks were already done). PPG does not recommend reducing the clear, but every painter I talked to said to reduce it. Guy that owned the booth said to reduce the hell out of it, and as it turns out, that worked out really well. I started the initial color sanding with 1000 grit to knock it down before the clear got too hard. Managed to get about 3 1/2 corners of the car complete; then on to the doors, trunks, lid, and targa. I'll do final sanding and buffing after assembly (cause you never know what oops might happen!). Andys Attached image(s) |
matthepcat |
Jul 19 2011, 01:28 PM
Post
#2
|
Meat Popsicle Group: Members Posts: 1,462 Joined: 13-December 09 From: Saratoga CA Member No.: 11,125 Region Association: Northern California |
Nice wheel combo. What size spacers are you running?
Matt |
andys |
Jul 19 2011, 02:29 PM
Post
#3
|
Advanced Member Group: Members Posts: 2,165 Joined: 21-May 03 From: Valencia, CA Member No.: 721 Region Association: None |
Nice wheel combo. What size spacers are you running? Matt I have custom trailing arms in the rear, so my off set is different than if they were stock. On the front, I have 2" spacers. Though the wheels fit the flare nicely, there are two problems. First, the tire (205-17) rubs the wheel well at full lock. I originally calculated the spacer should be 1 5/8". Since only 1 1/2" and 2" were available, I went with 2" (I didn't think it would rub, but I was wrong). The second problem I anticipate will be higher steering effort and kick-back due to the increased scrub radius.....Won't know for sure until I get it on the street or track. Andys |
Lo-Fi Version | Time is now: 27th September 2024 - 12:11 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |