914R build thread revisited, Latest transformation has commenced Options

[campbellcj]

Some of you may have seen my earlier build thread on the 914club site. In a nutshell I have a 73 2.0 that I converted to a six in 2003. It's now heavily modified and race-prepped, powered by a stout 2.7 twin-plug engine.

The car currently weighs 1988lbs without fuel or driver; my POC minimum class weight with gas and driver is 2209lbs. It's still narrow-bodied and I am running 16x7 Fuchs with 205/45 Hoosiers. As you might guess, the car is significantly grip-limited and traction-limited in the rear especially. It basically tears the tread off R6's within 6 run sessions or so.

Here is its current state:

(IMG:http://www.914world.com/bbs2/uploads_offsite/farm6.static.flickr.com-21-1309645382.1.jpg)
914R at Streets of Willow by cjcam, on Flickr

(IMG:http://www.914world.com/bbs2/uploads_offsite/farm6.static.flickr.com-21-1309645383.2.jpg)
914R at Willow Springs by cjcam, on Flickr

I just dropped it off at a local shop, about to dive into:

- Tangerine Racing steel flares, front/rear
- Sheridan 6" f/g rear spoiler
- Rollcage triangulation to suspension pickups
- Possibly other chassis bracing
- GT headlight lifts or remove lights completely
- Repaint car (TBD how extensively)
- RSR finish Fuchs 16x8's up front, 9's in rear
- New graphics/decals


One upcoming decision is whether to keep the sail vinyl or go body color without vinyl. I've always liked the factory vinyl and bright trim look but could go either way on this.

The work could start as soon as Tuesday and I'll post updates and pics as I get them. This is not going to be a CW rotisserie sort of project since it's a race car, so progress should happen quickly and I plan to run the POC Laguna Seca event towards the end of August.

Cheers,

[campbellcj]

Sorry for the lack of updates. Unfortunately my engine is a sick puppy and the car will be down for a while longer and another $$$$ bill is coming. 2011 season is over for me. (IMG:style_emoticons/default/sad.gif)

More evaluation and pricing is ongoing, but I'm basically facing 3 choices:

1) Replace only the totally unusable bits, put it back together and roll the dice
2) Also replace questionable bits and do some upgrades, such as more compression (pistons) and more aggressive cams
3) Swap-in a different engine and roll the dice

Technically selling the car with a hurt engine -- at a massive loss -- is a 4th option but that just ain't gonna happen.