TRANSMISSION REBUILT DVD, TRANSMISSION REBUILT DVD |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
TRANSMISSION REBUILT DVD, TRANSMISSION REBUILT DVD |
BAO B |
Jan 6 2012, 11:31 AM
Post
#1
|
Newbie Group: Members Posts: 43 Joined: 6-January 12 From: FLORIDA Member No.: 13,967 Region Association: None |
HI,
BRAND NEW TO FORUM. LOOKING FOR TRANSMISSION REBUILT DVD. APPRECIATE ANY INPUT. THANKS, BAO B |
Dr Evil |
Jan 6 2012, 06:31 PM
Post
#2
|
Send me your transmission! Group: Members Posts: 23,032 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region |
Hi Bao,
Your DVD is on its way as of tonight. For your question, which oil seal? If the surface that the seal sits on is not smooth, you can smooth it out with some fine sand paper and some time. If there is galling then you can fill it in with JB weld and smooth it with sand paper. Any pics of the surface of the oil seal area? |
BAO B |
Jan 6 2012, 09:24 PM
Post
#3
|
Newbie Group: Members Posts: 43 Joined: 6-January 12 From: FLORIDA Member No.: 13,967 Region Association: None |
Hi Bao, Your DVD is on its way as of tonight. For your question, which oil seal? If the surface that the seal sits on is not smooth, you can smooth it out with some fine sand paper and some time. If there is galling then you can fill it in with JB weld and smooth it with sand paper. Any pics of the surface of the oil seal area? DR. EVIL THANKS FOR THE REPLY. THE 2ND PIC WITH THE SHAFT STICKING OUT IS THE CLEAREST ONE. YES, INDEED I HAVE TRY SMOOTHING IT OUT WITH SAND PAPER AND JB WELD TO FILL THE LOW SPOT AND SAND TO SMOOTH OUT. YET, WHEN INSTALLING NEW SEAL IT TEAR EVERY SINGLE TIME. WHAT IS DIFFICULT IS THE MAIN SHAFT IN THE CENTER OF THE HOLE GIVING YOU VERY LIMITED SPACE TO REALLY DO A GOOD JOB TO SMOOTH THE SURFACE. MAY BE IF I REMOVE THE GEARS AND THUS THE MAIN SHAFT IS OUT, THAT WILL GIVE MORE ROOM FOR ME TO WORK ON THE DAMAGED SURFACE. IF I REMOVED ALL THE GEARS AND SEND YOU JUST THE CASE, CAN YOU PERFORM THE REPAIR AND INSTALL THE NEW OIL SEAL? JUST A THOUGHT FOR NOW. THANKS AGAIN BAO B |
Dr Evil |
Jan 7 2012, 05:25 AM
Post
#4
|
Send me your transmission! Group: Members Posts: 23,032 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region |
Hi Bao, Your DVD is on its way as of tonight. For your question, which oil seal? If the surface that the seal sits on is not smooth, you can smooth it out with some fine sand paper and some time. If there is galling then you can fill it in with JB weld and smooth it with sand paper. Any pics of the surface of the oil seal area? DR. EVIL THANKS FOR THE REPLY. THE 2ND PIC WITH THE SHAFT STICKING OUT IS THE CLEAREST ONE. YES, INDEED I HAVE TRY SMOOTHING IT OUT WITH SAND PAPER AND JB WELD TO FILL THE LOW SPOT AND SAND TO SMOOTH OUT. YET, WHEN INSTALLING NEW SEAL IT TEAR EVERY SINGLE TIME. WHAT IS DIFFICULT IS THE MAIN SHAFT IN THE CENTER OF THE HOLE GIVING YOU VERY LIMITED SPACE TO REALLY DO A GOOD JOB TO SMOOTH THE SURFACE. MAY BE IF I REMOVE THE GEARS AND THUS THE MAIN SHAFT IS OUT, THAT WILL GIVE MORE ROOM FOR ME TO WORK ON THE DAMAGED SURFACE. IF I REMOVED ALL THE GEARS AND SEND YOU JUST THE CASE, CAN YOU PERFORM THE REPAIR AND INSTALL THE NEW OIL SEAL? JUST A THOUGHT FOR NOW. THANKS AGAIN BAO B Much easier with the shaft out. If you have problems still, I would be happy to repair the case and install a seal for you. |
Lo-Fi Version | Time is now: 27th September 2024 - 02:16 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |