Aux Air Valve |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Aux Air Valve |
Bullet |
May 7 2004, 08:29 PM
Post
#1
|
Member Group: Members Posts: 116 Joined: 16-April 04 From: Newberg, OR Member No.: 1,940 |
Tomorrow im firing up the car for the first time since i have owned. And i got everything wired up all the vacuum hoses hooked up. But i noticed that i dont have the red wire for the Aux air vale connected to anything. I looked around for an open wire and found nothing. Where does this wire go? am I missing something?
|
JeffBowlsby |
May 8 2004, 06:37 AM
Post
#2
|
914 Wiring Harnesses Group: Members Posts: 8,663 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None |
QUOTE Damn maybe i hooked that up wrong then. the only wire that i can think of off the ecm harnessthat has a plastic conector is what i hooked up yo the Temp sensor. and then i hooked up the plactic connector on the harnees which goes to the starter is going to the Oil pressur switch. Did i goof some were? Yep you got it wrong. The long plastic box housing on the fuel injection harness goes to Temp Sensor 2 at cyl #3. I think you got that from your post. The green/red stripe wire from the ignition harnes (no plastic box housing) goes to teh oil pressure sender at the top of the engine, and the white wire off the ignition harness with the plastic box housing goes to the red wire on the AAR. |
Lo-Fi Version | Time is now: 27th September 2024 - 02:07 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |