TRANSMISSION REBUILT DVD, TRANSMISSION REBUILT DVD |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
TRANSMISSION REBUILT DVD, TRANSMISSION REBUILT DVD |
BAO B |
Jan 6 2012, 11:31 AM
Post
#1
|
Newbie Group: Members Posts: 43 Joined: 6-January 12 From: FLORIDA Member No.: 13,967 Region Association: None |
HI,
BRAND NEW TO FORUM. LOOKING FOR TRANSMISSION REBUILT DVD. APPRECIATE ANY INPUT. THANKS, BAO B |
Dr Evil |
Jan 14 2012, 08:24 AM
Post
#2
|
Send me your transmission! Group: Members Posts: 23,032 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region |
Bao,
you have it all set to come out. It looks as if your shifter shaft is caught. Make sure it is loose. You have 1st selected as well which keeps the gears from turning at all (you have both 5 and 1 selected). This is not a problem, but it may be easier if you pull the 1st slider back to neutral and then try to remove the stack. There is nothing to hold it in the case other than the shifter rod getting hung up. You just need to pull up and wiggle a little (IMG:style_emoticons/default/smile.gif) If you think this is hard, wait until you have to put it back in (IMG:style_emoticons/default/smile.gif) ....watch the DVD (IMG:style_emoticons/default/wink.gif) |
BAO B |
Jan 14 2012, 02:51 PM
Post
#3
|
Newbie Group: Members Posts: 43 Joined: 6-January 12 From: FLORIDA Member No.: 13,967 Region Association: None |
Bao, you have it all set to come out. It looks as if your shifter shaft is caught. Make sure it is loose. You have 1st selected as well which keeps the gears from turning at all (you have both 5 and 1 selected). This is not a problem, but it may be easier if you pull the 1st slider back to neutral and then try to remove the stack. There is nothing to hold it in the case other than the shifter rod getting hung up. You just need to pull up and wiggle a little (IMG:style_emoticons/default/smile.gif) If you think this is hard, wait until you have to put it back in (IMG:style_emoticons/default/smile.gif) ....watch the DVD (IMG:style_emoticons/default/wink.gif) FREE AT LAST!!!! YES!!!! I was able to removed the gear stack. I did some close up on the gears to view. Maybe you can spot something on the gears pic. and welcome to comment. Now, i need to pack the case and send it to you by usps to installed the oil seal for me, takes about 7 working days, since i'm not in a rush also save some money for shipping this way. I will include along with the case 2 oil seals and 2 gaskets cut out (one from the int. plate and one from main case), if i may ask you to measure the 2 gasket, so that i can buy the correct thickness gasket to fit between int. plate and main case. Your quote before for $20 to installed the seal and maybe another $5 for measuring the gaskets, is that ok. and ofcourse shipping cost. Dr. Evil, please provide me an address to send case to you. Thanks so very much for helping out. Bao b. Attached image(s) |
Lo-Fi Version | Time is now: 27th September 2024 - 02:17 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |