Effutuo build, Ok, enough brow beating. here you go... Options

[effutuo101]

(IMG:style_emoticons/default/dry.gif)
So, last year I picked up Ugmo. After a short stint, Rich D. came up with this car. As it already had a lot of what I wanted to do to my ride, I talked to Rich and we traded off Ugmo.
Let the cutting and welding begin.
We would need:
new floors welded in
cut off the remaining fenders
GT kit welded in
Media blast
primer

The eventual build would have
Fiberglass fenders, hoods, rear bumper
suby motor
Low maintenance
easy for the wiffy to drive
Lets begin

[effutuo101]

@ Ferg! (IMG:style_emoticons/default/pray.gif)
any new projects?
@ goth. spray lizard skin first. then put on matting. it must be sprayed on primer or paint. Jeggs has it cheap. the gun is really cheap. Also, for what you are doing, you might want to find somebody to go in with you and share the product. It comes in 2 gallon containers.

[gothspeed]

.................

@ goth. spray lizard skin first. then put on matting. it must be sprayed on primer or paint. Jeggs has it cheap. the gun is really cheap. Also, for what you are doing, you might want to find somebody to go in with you and share the product. It comes in 2 gallon containers.

Ok so the lizard skin must go on pretty smooth then? ........ if so, what you recommend sounds like a good aproach ..... the deadener mat I will be using is the damplifier pro ................ thanks man!! (IMG:style_emoticons/default/beerchug.gif)