914 with ej205 wiring question |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914 with ej205 wiring question |
jeepguy06 |
Dec 8 2021, 01:37 PM
Post
#1
|
Newbie Group: Members Posts: 45 Joined: 11-January 21 From: portland or Member No.: 25,060 Region Association: Pacific Northwest |
so i have been building my 914 and got to the motor and ecu part. i have cut the wiring harness from 2002 impreza wrx full harness but the problem i am having now is that the obd2 port wont read. I have been able to use a bluetooth reader to pull codes. when i plug in a cable reader i get an error and the tactrix 2.0 cable using ecuflash wont do anything. just keeps telling me failed . i have looked at the wiring diagrams and all the wires are in the pin locations they call for but there are two wires not hooked up. green red and brown white. they go to the abs brain. can someone shed some light on what might be going on or how most of you wired yours in to work. (IMG:style_emoticons/default/headbang.gif)
|
tazz9924 |
Dec 8 2021, 07:09 PM
Post
#2
|
Senior Member Group: Members Posts: 716 Joined: 31-May 15 From: Mooresville NC Member No.: 18,779 Region Association: None |
so i have been building my 914 and got to the motor and ecu part. i have cut the wiring harness from 2002 impreza wrx full harness but the problem i am having now is that the obd2 port wont read. I have been able to use a bluetooth reader to pull codes. when i plug in a cable reader i get an error and the tactrix 2.0 cable using ecuflash wont do anything. just keeps telling me failed . i have looked at the wiring diagrams and all the wires are in the pin locations they call for but there are two wires not hooked up. green red and brown white. they go to the abs brain. can someone shed some light on what might be going on or how most of you wired yours in to work. (IMG:style_emoticons/default/headbang.gif) Big thing make sure you have power and ground at the port. i forget which pins but it’s universal |
jeepguy06 |
Dec 8 2021, 07:31 PM
Post
#3
|
Newbie Group: Members Posts: 45 Joined: 11-January 21 From: portland or Member No.: 25,060 Region Association: Pacific Northwest |
so i have been building my 914 and got to the motor and ecu part. i have cut the wiring harness from 2002 impreza wrx full harness but the problem i am having now is that the obd2 port wont read. I have been able to use a bluetooth reader to pull codes. when i plug in a cable reader i get an error and the tactrix 2.0 cable using ecuflash wont do anything. just keeps telling me failed . i have looked at the wiring diagrams and all the wires are in the pin locations they call for but there are two wires not hooked up. green red and brown white. they go to the abs brain. can someone shed some light on what might be going on or how most of you wired yours in to work. (IMG:style_emoticons/default/headbang.gif) Big thing make sure you have power and ground at the port. i forget which pins but it’s universal I have checked and yes I have power and grounds. |
Lo-Fi Version | Time is now: 27th September 2024 - 09:44 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |