Paging Mueller, Bowlsby, Bleyseng and Jaroen |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Paging Mueller, Bowlsby, Bleyseng and Jaroen |
r_towle |
Jan 11 2006, 08:07 PM
Post
#1
|
Custom Member Group: Members Posts: 24,624 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Hi guys,
Through a local DOD contractor I found a few small shops that will make Berillium Diaphrams... Apparently the new fighter jets use alot of the material, so they are set up to work with it, and do small runs... So , what I need, to get a price, is CAD drawings of the diaphram, and the piece that gets pressed into the middle.. I have been told that they can do it, based upon my description. So, did anyone ever make a drawing of the diaphram...or maybe please......mike...could you... Rich |
Demick |
Jan 17 2006, 10:45 PM
Post
#2
|
Ernie made me do it! Group: Benefactors Posts: 2,312 Joined: 6-February 03 From: Pleasanton, CA Member No.: 257 |
OK. I got the diaphragm from Jeff today. This is the first one I have seen (except for in pictures). I was very surprised at how small the stamped pleates are in this diaphragm. They seem much smaller than they seem from other pictures. Especially the outermost (widest) pleat. It's probably only 3 or 4 mils tall, and is barely even discernable as a pleat.
Attached image(s) |